SpeedClean™ 2000 PSI Pressure Washer
KNOW YOUR PRESSURE WASHER
Read this Operator’s Manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference.
Recoil Starter
Air Filter
Throttle Control Lever
Primer Bulb 
Pump equipped with Automatic
Cool Down System
Adjustable Nozzle (not shown) — Always attached to nozzle extension. Adjustable nozzle allows you to adjust spray pressure and spray pattern.
Air Filter — Protects engine by filtering dust and debris out of intake air.
Automatic Cool Down System — Cycles water through pump when water reaches
Chemical Injection Siphon/Filter (not shown) — Use to siphon detergent or other pressure washer chemicals into the low pressure stream.
High Pressure Hose (not shown) — Connect one end to water pump and the other end to spray gun.
High Pressure Outlet — Connection for high pressure hose.
Oil Fill/Dipstick
Water Inlet
High Pressure Outlet
Data Tag (not shown, near rear of base plate) – Provides model and serial number of pressure washer. Please have these readily available if calling for assistance.
Oil Fill/Dipstick — Check and fill with oil here.
Primer Bulb — Prepares a cold engine for starting.
Pump — Develops high pressure.
Recoil Starter — Used for starting the engine manually.
Spray Gun (not shown) — Controls the application of water onto cleaning surface with trigger device. Includes trigger lock.
Throttle Control Lever — Sets engine in starting mode for recoil starter and stops a running engine.
Water Inlet — Connection for garden hose.
6
