Total Head | Discharge Head | |
- 117 feet (35.6m) | ||
- 92 feet (28m) | ||
Maximum | ||
Maximum | ||
|
Suction Head
-25 feet (8m) Maximum
Prime the Trash Pump | Locate Strainer Basket Into Water Source |
1. Remove priming plug from top of pump. | Place strainer basket into water to be pumped. Basket must |
| be fully immersed in water. |
| |
|
|
2. Fill pump with clean, clear water up to top of discharge outlet.
3. Replace priming plug.
NOTICE
Improper treatment of trash pump can damage it and shorten its life.
•Be sure pump chamber is filled with water before starting the engine. NEVER run pump without priming.
NOTICE
Improper treatment of trash pump can damage it and shorten its life.
•NEVER operate pump without strainer connected to end of suction hose.
•Keep strainer out of sand or silt, place in bucket or on stones.
•DO NOT let pump run dry or damage to seals may result.
12 | BRIGGSandSTRATTON.COM |