Briggs & Stratton Power Products Home Generator

Owners Manual

This Briggs & Stratton Home Standby Generator

UNPACKING

 

complies with the following “stationary standby

 

power rating”:

The standby power rating is applicable for supplying power for the duration of normal power interruption. NO sustained overload capability is available for this rating.

This rating is applicable to installations served by a reliable normal utility source.This rating is only applicable to variable loads with an average load factor of 80% of the standby rating.The standby rating is only applicable for optional standby power where the generator set serves as the backup to the normal utility source.

Use the “Wattage Reference Guide” provided and mark those circuits you consider “critical” or “essential”. Make sure you and your installer consider the system’s altitude above sea level and the ambient temperature range when determining total generator load.

IMPORTANT: When using the 100 Amp or 200 Amp transfer switch with the Home Standby Generator, you must turn off any non essential loads. Failure to turn off non essential loads could overload the generator causing it to shut down. Some examples of non essential loads are as follows:

Pool pump

Hot tub

Electric hot tub and/or pool heaters

Central air conditioners

Electric hot water heaters

Electric range and/or oven

Arc welder

Non essential electric heaters

Refer to the Installation Manual for detailed unpacking instructions, if desired.

Delivery Inspection

After removing the carton, carefully inspect the Home Standby Generator for any damage that may have occurred during shipment.

IMPORTANT: If loss or damage is noted at time of delivery, have the person(s) making delivery note all damage on the freight bill and affix his signature under the consignor's memo of loss or damage. If loss or damage is noted after delivery, separate the damaged materials and contact the carrier for claim procedures. Missing or damaged parts are not warranted.

Shipment Contents

The Home Standby Generator is supplied with:

Home standby generator

Attached mounting pad

One 24” flexible fuel hook-up hose

Installation manual (P/N 192385GS)

Owner’s manual (P/N 192384GS)

Illustrated parts list manual (P/N 193208GS for model 01815 or P/N 193209GS for model 01931)

Product warranty sheet (P/N 190881GS)

Installation checklist (P/N 190840GS)

Three access door keys

Four lifting hole plugs

Oil fill spout

Touch-up paint

One spare 15 Amp fuse

Diagnostic LED kit (diode/plate/decal/pin connectors (2))

8

Page 8
Image 8
Briggs & Stratton 10KW, 12KW owner manual Unpacking, Delivery Inspection, Shipment Contents