SERVICE AIR FILTER &

PRE-CLEANER

Service Interval: Pre-Cleaner: Every 25 hours or as

required. Air Filter: Every 50 hours or as required.

Replacement Interval: Pre-Cleaner: As required. Air

Filter: Every 200 hours or once per season.

Air Filter Removal & Installation

1.Lift up on the bottom of the latch (A, Figure 28 or 29) and flip the latch away from the cover.

2.Remove the cover (B). Remove the filter (C, Figure 27) and pre-cleaner (D).

3.Install the pre-cleaner (D) with the mesh side up. Install the filter (C) as shown.

4.Install the cover (B, Figure 29) making sure the tabs are inserted into their slots. Secure with the latch (A).

A

B

A

B

1.

A

2.

B

3.

Figure 28. Air Filter Assembly - Briggs & Stratton Single Cylinder Models

A.Air Filter Latch

B.Air Filter Cover

AC

D

B

Figure 29. Air Filter Service - Briggs & Stratton Single Cylinder Models

A.Air Filter Latch

B.Air Filter Cover

C.Air Filter

D.Pre-Cleaner

23

Page 25
Image 25
Briggs & Stratton 150Z Series manual Service AIR Filter PRE-CLEANER, Air Filter Removal & Installation