Installation Instructions | Roller Bar Mower Kit |
MOWER DECK REMOVAL &
INSTALLATION
Chain Lift Models
WARNING
Engage parking brake, disengage PTO, stop engine and remove key before attempting to install or remove the mower.
Muffler and surrounding areas may be hot.
Removing the Mower Deck
1.Park the tractor, fully lower the attachment lift, turn off the PTO, turn off the engine, remove the key, and engage the parking brake. If equipped, pivot the gauge wheels into sliding position.
2.Place mower in the lowest cutting position using the mower height control.
3.Use the idler arm (D, Figure 4) to release tension on the PTO belt, and remove belt from the PTO pulley.
4.Pull down on the lift hooks (A, Figure 4) and unhook
CAUTION
The muffler and surrounding areas may be hot.
the lift chains (B).
5.Turn the wheels straight ahead. Pull back on spring- loaded lever (B, Figure 5) and lift mower hitch off of the tractor brackets (A).
6.Turn wheels fully left, and slide mower deck out from under the right side of the tractor.
A |
C |
B |
D |
Figure 4. Mower Lift |
|
A. Lift Hook | C. PTO Belt |
B. Lift Chain | D. Idler Arm |
4
