Removal
Snow Blade Removal
CAUTION
Make sure to shut off the engine and lock the tractor brakes or block the rear wheels before beginning the snow blade removal process.
1.Lower the snow blade to the ground.
2.Remove the four (4) hair pins (C, Figure 16) from the control arm (A) and remove the control arm from the snow blade assembly.
3.Remove the control arm from the tractor.
NOTE: The control arm support bracket can be left on the tractor.
4.Remove the bell crank hair pin (A, Figure 17) and remove the snow blade lift arm (B) from the bell crank
(C).
5.Remove lift arm (B) from the mower deck lift arm by removing the hairpin cotter pin (D) from the stand off
(F). Fully remove the snow blade lift arm (B) from the tractor.
NOTE: Leave the stand off attached to the mower deck lift arm.
A |
B |
C |
Figure 16. Control Arm Removal
A.Control Arm
B.Ball Joints
C.Hair pins
F | B |
| |
| B |
| E |
| C |
D | A |
| B |
Figure 17. Control Arm Removal
A.Hair pin
B.Snow Blade Lift Rod
C.Bell Crank
D.Hair pin
E.Flat Washer
F.Standoff
16
