Section 4: Operation
How to Use Accessory Tray
The unit is equipped with an accessory tray with places to store your nozzle extension and slots to hold the cleaning solution bottle and the detergent siphoning filter.There are also two hooks at the ends of the handle to hold your spray gun and high pressure hose.
NOTE: The extra holes in the tray are for storing a brush and a turbo wand.The brush and turbo wand are NOT included with your pressure washer.You can buy these items as optional accessories.
1.Place nozzle extension through hole on accessory tray, as shown in Figure 14.
Figure 14 — Accessory Tray
2.Hang your chemical solution bottle on “J” hook and place detergent siphoning filter in last slot on left (Figure 14).
3.Place spray gun on hook attached to accessory tray on right side of unit (Figure 14).
4.Hang high pressure hose on hook attached to accessory tray on left side of unit.
How to Use Spray Tips
The
CAUTION
A pressure washer produces a high pressure spray which increases risk of injury and damage to unit.
•NEVER exchange spray tips without locking the safety latch on the trigger.
Figure 15 — Spray Tip Spray Patterns
Low Pressure
Black
Use to apply
chemical
High Pressure
40° White |
| 15° Yellow |
| 0° Red |
Follow these instructions to change spray tips:
1.Engage safety latch on spray gun.
2.Pull back collar on
3.Select desired spray tip:
•For gentle rinse, select white 40° spray tip.
•To scour surface, select yellow 15° or red 0° spray tip.
•To apply chemical, select black spray tip.
4.Pull back on collar, insert new spray tip and release collar.Tug on spray tip to make sure it is securely in place.
5.For most effective cleaning, keep spray tip from 8 to 24 inches away from cleaning surface. If you get spray tip too close, you may damage cleaning surface. DO NOT get closer than 6 inches when cleaning tires.
10
