Briggs & Stratton 195764GS, 20228 owner manual How to Use ProjectPro Nozzle System

Models: 195764GS 20228

1 36
Download 36 pages 55.92 Kb
Page 11
Image 11

Section 4: Operation

How to Use ProjectPro™ Nozzle System

The quick–connect on the nozzle extension allows you to switch between four different ProjectPro™ system nozzles. The ProjectPro™ nozzles vary the pressure and spray pattern as shown (Figure 12).

Figure 12 — Nozzle Spray Patterns

 

Low Pressure

 

 

Black

 

 

Use to apply

 

detergent

 

High Pressure

 

Delicate

General

Max

40° Yellow

15° Orange

0° Red

1650 PSI

1950 PSI

2200 PSI

2.2 GPM

2.1 GPM

1.9 GPM

Follow these instructions to change ProjectPro™ nozzles:

1.Engage trigger lock on spray gun.

CAUTION

A pressure washer produces a high pressure spray which increases risk of injury and damage to unit.

NEVER exchange ProjectPro™ nozzles without locking the trigger lock on the trigger.

DO NOT twist ProjectPro™ nozzles while spraying.

2.Pull back collar on quick–connect and pull current ProjectPro™ nozzles off. Store ProjectPro™ nozzles in holder provided on the accessory tray.

3.Select desired ProjectPro™ nozzle:

For delicate rinse (lower pressure and higher flow), for gentle cleaning of cars/trucks, boats, RV’s, patio furniture, lawn equipment, etc., select yellow Delicate ProjectPro™ nozzle (Figure 13).

Figure 13 — Delicate Nozzle

For general rinsing (medium pressure and medium flow), ideal for most all purpose cleaning such as home siding, brick patios, wood decks, driveways and sidewalks, garage floors, etc., select orange General ProjectPro™ nozzle (Figure 14).

Figure 14 — General Nozzle

11

Page 11
Image 11
Briggs & Stratton 195764GS How to Use ProjectPro Nozzle System, Follow these instructions to change ProjectPro nozzles