Briggs & Stratton 20228, 195764GS Engine Maintenance, Pump Maintenance, Changing Pump Oil

Models: 195764GS 20228

1 36
Download 36 pages 55.92 Kb
Page 16
Image 16

Section 5: Maintenance

Pump Maintenance

Changing Pump Oil

Change oil every 50 hours or once yearly, whichever occurs first.

NOTE: Purchase a premeasured bottle of pump oil, item number 190586GS, by contacting the nearest authorized service center.

Change pump oil as follows:

1.Drain engine oil and fuel from pressure washer.

2.Use a 8mm allen wrench to remove black pump oil cap between high pressure outlet and garden hose inlet (Figure 21).

Figure 21 - Changing Pump Oil

Oil Cap

3.Tilt pressure washer to drain oil into an approved container until it drips slowly from pump.

4.Tilt pressure washer in opposite direction and empty premeasured pump oil bottle into same opening (a small funnel may be helpful).

5.Install black pump oil cap and tighten firmly.

6.Set pressure washer in upright position. Add fuel and engine oil.

ENGINE MAINTENANCE

See the engine owner’s manual for instructions on how to properly maintain the engine.

CAUTION

Avoid prolonged or repeated skin contact with used motor oil.

Used motor oil has been shown to cause skin cancer in certain laboratory animals.

Thoroughly wash exposed areas with soap and water.

KEEP OUT OF REACH OF CHILDREN. DON'T POLLUTE. CONSERVE RESOURCES. RETURN USED OIL TO COLLECTION CENTERS.

16

Page 16
Image 16
Briggs & Stratton 20228, 195764GS Engine Maintenance, Pump Maintenance, Changing Pump Oil, Change pump oil as follows