Briggs & Stratton 20258 CAT Pumps Warranty, This Warranty is Subject to the Following Conditions

CAT PUMPS WARRANTY

This pump is warranted by the manufacturer to be free from defects in workmanship and material for ONE YEAR from date of manufacturer’s shipment except:

•FIVE YEARS for 2SF, 4SF and 66DX pumps and all portable fresh water PRESSURE WASHER pumps.

•TWO YEARS for 2DX, 3DX, 3SP and all CAR WASH pumps except FIVE YEARS for 5CP2120W, 5CP2140WCS, 5CP2150W.

•SIX MONTHS for 1LX and all rebuilt pumps.

•90 DAYS on Accessories.

The sole responsibility for warranty on all motors is that of their original manufacturers.

This warranty DOES NOT APPLY to malfunctions caused by the FAULT or NEGLIGENCE of the buyer or third party, including failure to perform periodic maintenance (oil, seal and valve change), to the IMPROPER USE of the pump as a component part, to failures reported to the manufacturer AFTER the WARRANTY PERIOD has EXPIRED, or to the NORMAL WEAR of standard wear items in the pump such as V-packings, seals, cups, o-rings, valves, etc.

This express warranty is in substitution for and in lieu of all other warranties, whether expressed or implied, including, without limitation, any warranties or merchantability or fitness for a particular purpose and all such warranties are hereby disclaimed and excluded by the manufacturer.

In order to take advantage of this warranty, you must first contact your local CAT PUMPS supplier for a Return Goods Authorization Number (763•780•5440, Fax 763•780•2958). Any defective product must be returned FREIGHT PREPAID to CAT PUMPS, 1681 94th Lane N.E., Minneapolis, MN 55449 (or international office of origin) for examination and disposition. CAT PUMPS agrees to be responsible for return shipping costs on any approved warranty repair or replacement product with a carrier selected by CAT PUMPS. (Use original or comparable carton to avoid damage in shipment.) The serial number of the product will determine warranty date unless original purchase invoice can be provided.

The buyer agrees that the sole and exclusive remedy in law or in equity for breach of any and all warranties and the sole and exclusive remedy for the manufacturer's liability of any kind (including, without limitation, liability for negligence) with respect to the product and all other performance by the manufacturer will be limited to the REPAIR OF, OR AT MANUFACTURER’S OPTION,THE REPLACEMENT OF THE PRODUCT. Buyer further agrees that manufacturer will, in no event, have any responsibility or bear any liability for (a) the cost of labor for the removal of any defective product or the installation of any replacement product, or (b) the cost of transportation to the manufacturer of the defective products returned for evaluation. Finally, buyer agrees that the manufacturer shall not be liable for any other loss, damage or expense, including any special, incidental or consequential loss or damage (including, without limitation, lost profits), even if the manufacturer has been advised of the possibility of such potential loss or damage.

THIS WARRANTY IS SUBJECT TO THE FOLLOWING CONDITIONS:

SPECIFICATIONS: Pump operation must be within RPM, Discharge Pressure and Inlet Pressure specifications. A pressure relief valve must be correctly installed in the system.

PUMPED LIQUIDS: The warranty is VOID if pump operation commences without sufficient liquid to the pump. Do not pump harsh acids or alkalines or abrasive liquids. For pumped liquids below 5 pH or above 9 pH, above 130°F, above 500 CPS (2500 SSU) or other questionable liquids, contact CAT PUMPS for additional information on alternative construction and installation.

LUBRICATION: The use of Genuine CAT PUMPS special custom-blend, multi-viscosity, ISO-68 hydraulic oil is highly recommended. WARNING: Use of alternate oils that do not provide proper lubrication will VOID YOUR PUMP WARRANTY.The warranty is also VOID if pump operation commences without the proper amount of oil in the crankcase, oil becomes contaminated or pump operates without periodic oil changes as recommended. Fill Gearbox pumps with required lubricant before initial start-up. Review individual service manual and data sheet for required amount of oil (lubricant) and maintenance cycle.

TEMPERATURE: Protect pump from freezing. Do not store in area with freezing conditions. Drain completely of pumped liquid. Flush with antifreeze. Do not operate pump which contains frozen liquid. Do not store or operate in excessively high temperature areas or without proper ventilation.

USE OF OTHER THAN CAT PUMPS PARTS VOIDS THE WARRANTY

This supercedes any and all previous warranty statements.

2/06 Rev N