Assembly, Add Engine Oil and Fuel | Briggs & Stratton 20258 specs

Section 3: Assembly

Add Engine Oil and Fuel

• Place pressure washer on a level surface.

CAUTION

Any attempt to crank or start the engine before it has been properly filled with the recommended oil will result in equipment failure.

•Refer to engine operaor’s manual for oil and fuel fill information.

•Damage to equipment resulting from failure to follow this instruction will void warranty.

•Refer to engine operator’s manual and follow oil and fuel recommendations and instructions.

NOTE: Check oil often during engine break–in. Refer to engine operator’s manual for recommendations.

Connect Hose and Water Supply to Pump

IMPORTANT: To avoid pump damage, you must assemble the nozzle extension to the spray gun and attach all hoses before you start the engine.

1.Remove and discard tape from domed oil filler cap on top of pump.

2.Uncoil high pressure hose and attach quick connect end of hose to base of spray gun (Figure 3). Pull down on collar of quick connect, slide onto spray gun and let go of collar.Tug on hose to be sure of a tight connection.

Figure 3 — Connect High Pressure Hose to Spray Gun

Connect high pressure hose here

NOTE: Remove and discard all pump shipping caps before attaching hoses.

3.Similarly, attach other end of high pressure hose to the high pressure outlet on pump. Pull down on collar of quick connect, slide onto pump and let go of collar. Pull on hose to be sure of a tight connection.

4.Before connecting garden hose to water inlet, inspect inlet screen (Figure 4). Clean screen if it contains debris or replace if damaged. DO NOT run pressure washer if inlet screen is missing or damaged.

Figure 4 — Connect Garden Hose to Water Inlet

Inspect inlet screen. DO NOT use if damaged or missing; clean if dirty.

5.Run water through garden hose for 30 seconds to clean out any debris.Turn off water.

IMPORTANT: DO NOT siphon standing water for the water supply. Use ONLY cold water (less than 100°F).

6.Connect garden hose (not to exceed 50 feet in length) to water inlet.Tighten by hand (Figure 4).

CAUTION

There MUST be at least ten feet of unrestricted garden hose between the pressure washer inlet and any flow shut off device, such as a ‘Y’ shut-off connector or other convenience- type water shut-off valve.

•Damage to equipment resulting from failure to follow this instruction will void warranty.

7.Turn ON water, point gun in a safe direction and squeeze trigger to purge pump system of air and impurities.

WARNING

High pressure spray can cause paint chips or other particles to become airborne.

•Always wear safety goggles when using this equipment or in vicinity of where equipment is in use.

•Before starting the pressure washer, be sure you are wearing adequate safety goggles.

Checklist Before Starting Engine

Review the unit’s assembly to confirm you have performed all of the following:

1.Make sure handle is secure.

2.Check for properly tightened hose connections.

3.Check to make sure there are no kinks, cuts, or damage to high pressure hose.

4.Check that oil has been added to proper level in engine crankcase.

5.Add proper fuel to fuel tank.

6.Provide a proper water supply (not to exceed 100°F).

7.Be sure to read “Safety Rules” and “How To Use Your Pressure Washer” before using pressure washer.

20258 specifications

The Briggs & Stratton 20258 is a versatile and reliable portable generator designed to meet a wide range of power needs. This compact generator is ideal for homeowners, outdoor enthusiasts, and those who need backup power during outages. With its combination of innovative technology and robust features, the 20258 stands out as a dependable choice in the generator market.

One of the key features of the Briggs & Stratton 20258 is its powerful engine. The generator is equipped with a reliable 7500-watt starting capacity and a running capacity of 6000 watts, making it capable of powering essential appliances such as refrigerators, sump pumps, and lights during emergencies. This high output ensures that users can maintain critical functions in their homes without significant interruption.

The 20258 has a user-friendly control panel that includes multiple outlets, allowing for easy connection of various devices. It features four 120V 20A outlets, one 120V 30A twist-lock outlet, and one 12V DC outlet for charging batteries, providing versatility for different power needs. The inclusion of a circuit breaker enhances safety by preventing overloads and ensuring the generator operates efficiently.

In terms of technology, the Briggs & Stratton 20258 is designed with a durable steel frame for enhanced protection and longevity. Its portable design incorporates rugged wheels and a foldable handle, making transport convenient, whether for home use or outdoor activities. This generator also features an easy-start system, allowing users to fire up the engine with minimal effort, even in cold weather.

Another notable characteristic of the 20258 is its Quiet Power Technology, which significantly reduces noise levels during operation. This makes it a suitable choice for residential use where noise restrictions may apply. The generator runs smoothly and quietly, enhancing user comfort and reducing the impact on the surrounding environment.

Maintenance is a breeze with the 20258, thanks to its easy-access oil fill and extended run times. With a fuel tank capacity of 7.5 gallons, this generator can operate for up to 10 hours at half-load, ensuring ample power supply without frequent refueling.

Overall, the Briggs & Stratton 20258 combines power, portability, and advanced technology, making it an excellent option for anyone in need of reliable, temporary power. Whether for emergency backup or recreational use, this generator delivers on both performance and convenience.

Briggs & Stratton 20258 Assembly, Add Engine Oil and Fuel, Connect Hose and Water Supply to Pump

Models: 20258