Section 4: Operation

8.Engage trigger lock on spray gun trigger (Figure 12).

Figure 12 — Spray Gun with Safety Latch Engaged

Safety Latch

9.When starting engine, position yourself as recommended in Figure 13 and start engine according to instructions given in engine operator’s manual.Also see operating instructions tag located on the pressure washer.

Figure 13 - Recommended Starting Position

WARNING

Rapid retraction of starter cord (kickback) will pull hand and arm toward engine faster than you can let go.

Broken bones, fractures, bruises or sprains could result.

•ALWAYS point gun in safe direction and squeeze spray gun trigger, to release pressure and avoid kickback each time, before starting engine.

•When starting engine, pull cord slowly until resistance is felt and then pull rapidly to avoid kickback.

•After each starting attempt, where engine fails to run, always point gun in safe direction and squeeze spray gun trigger to release high pressure.

•Firmly grasp spray gun with both hands when using high pressure spray to avoid injury when gun kicks back.

NOTE: Always keep the throttle lever in the “Fast” position when operating the pressure washer.

WARNING

Running engines produce heat.Temperature of muffler and nearby areas can reach or exceed 150°F (65°C).

Severe burns can occur on contact.

Exhaust heat/gases can ignite combustibles, structures or damage fuel tank causing a fire.

•DO NOT touch hot surfaces and avoid hot exhaust gases.

•Allow equipment to cool before touching.

•Keep at least 5 ft. (152 cm) clearance on all sides of pressure washer including overhead.

•Code of Federal Regulation (CFR) Title 36 Parks, Forests, and Public Property require equipment powered by an internal combustion engine to have a spark arrester, maintained in effective working order, complying to USDA Forest service standard 5100-1C or later revision. In the State of California a spark arrester is required under section 4442 of the California Public resources code. Other states may have similar laws.

How to Stop Your Pressure Washer

1.Let engine idle for two minutes.

2.Turn engine off according to instructions given in engine operator’s manual.

3.ALWAYS point gun in a safe direction and squeeze spray gun trigger to release retained high water pressure.

IMPORTANT: Spray gun traps high water pressure, even when engine is stopped and water is disconnected.

WARNING

The high pressure stream of water that this equipment produces can pierce skin and its underlying tissues, leading to serious injury and possible amputation.

Spray gun traps high water pressure, even when engine is stopped and water is disconnected, which can cause injury.

•Keep high pressure hose connected to pump and spray gun while system is pressurized.

•ALWAYS point gun in safe direction and squeeze spray gun trigger, to release high pressure, every time you stop engine. Engage trigger lock when not in use.

4.Engage trigger lock on spray gun when not in use.

11

Page 10 Page 12
Page 11
Image 11
Briggs & Stratton 20263 manual Operation, How to Stop Your Pressure Washer, Engage trigger lock on spray gun trigger Figure
Page 10 Page 12

20263 specifications

Briggs & Stratton 20263 is a powerful and efficient engine model known for its reliability and performance in a variety of outdoor applications. This engine is particularly popular for use in lawn mowers, pressure washers, and other outdoor power equipment, thanks to its robust design and advanced features that make it a preferred choice among both homeowners and professionals.

One of the standout features of the Briggs & Stratton 20263 engine is its overhead valve (OHV) technology. This design provides better airflow and enhances fuel efficiency, allowing the engine to deliver more power while consuming less fuel. This efficiency not only reduces operational costs but also minimizes emissions, making it an environmentally friendly option.

Additionally, the 20263 model is equipped with a recoil start mechanism and an integrated fuel system, which ensures easy starting and smooth operation. The engine’s 206 cc displacement provides ample power for tough tasks, and the high torque output allows it to maintain performance under heavy loads.

The construction of the Briggs & Stratton 20263 engine is designed to withstand harsh conditions. It features a durable cast iron sleeve that enhances the engine's longevity and reduces wear over time. Furthermore, the engine is equipped with a dual-sealed air filter that helps protect the internal components from dust and debris, ensuring consistent performance and reliability.

Another remarkable characteristic of the 20263 model is its low vibration technology. This feature helps reduce operator fatigue, making it more comfortable to use for extended periods. The engine is also designed to operate quietly, significantly minimizing noise pollution, which is especially important for residential areas.

Moreover, the Briggs & Stratton 20263 engine supports a variety of attachments and accessories, making it versatile for numerous outdoor applications. Whether you need an engine for lawn care or cleaning, its comprehensive compatibility is a significant advantage.

In summary, the Briggs & Stratton 20263 engine combines power, efficiency, and durability. With its innovative technologies, ease of use, and reliable performance, it stands out as a top choice for anyone in need of a robust outdoor power solution.
Top Page Image Contents