Briggs & Stratton 20263 manual Operation, Select desired ProjectPro nozzle

Section 4: Operation

3. Select desired ProjectPro™ nozzle:	• For maximum rinsing (higher pressure and lower
• For delicate rinse (lower pressure and higher	flow), for stubborn or hard to reach surface such
	as second story surfaces, paint removal, oil stains,
flow), for gentle cleaning of cars/trucks, boats, RV’s,
	rust removal or other stubborn substances (tar,
patio furniture, lawn equipment, etc., select yellow
	gum, grease, wax, etc.), select red Max
Delicate ProjectPro™ nozzle (Figure 16).
	ProjectPro™ nozzle (Figure 18).
Figure 16 — Delicate Nozzle
	Figure 18 — Max Nozzle

•For general rinsing (medium pressure and medium flow), ideal for most all purpose cleaning such as home siding, brick patios, wood decks, driveways and sidewalks, garage floors, etc., select orange General ProjectPro™ nozzle (Figure 17).

Figure 17 — General Nozzle

•To apply detergent, applies project specific cleaners to help break down stubborn dirt and grime on a variety of surfaces, select black ProjectPro™ cleaning detergent nozzle (Figure 19).

Figure 19 — Cleaning Detergent Nozzle

4.Pull back on collar, insert new ProjectPro™ nozzle and release collar.Tug on ProjectPro™ nozzle to make sure it is securely in place.

5.For most effective cleaning, keep ProjectPro™ nozzle from 8 to 24 inches away from cleaning surface. If you get ProjectPro™ nozzle too close, you may damage cleaning surface.

6.DO NOT get closer than 6 inches when cleaning tires.

13