Section 4: Operation
How to Use Accessory Tray
The unit is equipped with an accessory tray with places to store your spray gun, nozzle extension and ProjectPro™ nozzles.There is also a hook at the front of the accessory tray to hold your high pressure hose.
NOTE: The extra hole in the tray is for storing a utility brush.The extra clip in the tray is for storing a turbo nozzle.The brush and turbo nozzle are NOT included with your pressure washer.You can buy these items as optional accessories.
1.Place nozzle extension through hole on accessory tray, as shown in Figure 12.
Figure 12 — Typical Accessory Tray
2.Place spray gun through hole on accessory tray on right side of unit (Figure 12).
3.Hang high pressure hose on hook attached to accessory tray on front of tray, as shown in Figure 12.
How to Use ProjectPro™ Nozzle System
The
Follow these instructions to change ProjectPro™ nozzles:
1.Engage trigger lock on spray gun.
CAUTION
A pressure washer produces a high pressure spray which increases risk of injury and damage to unit.
•NEVER exchange ProjectPro™ nozzles without engaging the trigger lock on the spray gun trigger.
•DO NOT twist ProjectPro™ nozzles while spraying.
2.Pull back collar on
3.Select desired ProjectPro™ nozzle:
Figure 13 — Nozzle Spray Patterns
| Low Pressure |
|
| Black |
|
| Use to apply | |
| detergent | |
| High Pressure |
|
Delicate | General | Max |
40° Yellow | 15° Orange | 0° Red |
2350 PSI | 2675 PSI | 3000 PSI |
2.7 GPM | 2.5 GPM | 2.3 GPM |
•For delicate rinse (lower pressure and higher flow), for gentle cleaning of cars/trucks, boats, RV’s, patio furniture, lawn equipment, etc., select yellow Delicate ProjectPro™ nozzle (Figure 14).
Figure 14 — Delicate Nozzle
12
