Briggs & Stratton 206405GS Features and Controls, B - Start Switch - Push to start the engine

Models: 206405GS

1 52
Download 52 pages 23.34 Kb
Page 10
Image 10
Features and Controls

Features and Controls

Read this Operator’s Manual and safety rules before operating your generator.

Compare the illustrations with your generator, to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference.

P

A

N

M

B

L

K

C B - Start Switch — Push to start the engine.

J

D

E C - Fuel Tank — Capacity of seven (7) U.S. gallons.

H

F

G

A - Battery Float Charger — Use battery float charger jack to keep the starting battery charged and ready for use.

B - Start Switch — Push to start the engine.

C - Fuel Tank — Capacity of seven (7) U.S. gallons.

D - Oil Fill Cap/Dipstick — Check and add engine oil here. E - Choke Lever — Used when starting a cold engine.

F - Recoil Starter — Used to start the engine.

G - Air Cleaner — Protects engine by filtering dust and debris out of intake air.

H - Engine Rocker Switch — Set this switch to "On" before using recoil starter. Set switch to "Off" to switch off engine.

J - Identification Label — Provides model, revision and serial number of generator. Please have these readily available when calling for assistance.

K - Grounding Fastener — Consult your local agency having jurisdiction for grounding requirements in your area.

L - Circuit Breakers (AC) — The 120 Volt AC, 20A duplex receptacles are provided with "push to reset" circuit breakers to protect the generator against electrical overload.

M - 120 Volt AC, 20 Amp, Duplex Receptacles — May be used to supply electrical power for the operation of

120 Volt AC, 20 Amp, single phase, 60 Hz electrical, lighting, appliance, tool and motor loads.

N - Rocker Switch Circuit Breaker — The 120/240 Volt AC, 30A locking receptacle is provided with a rocker switch circuit breaker to protect the generator against electrical overload. This switch also controls all receptacles.

P - 120/240 Volt AC, 30 Amp Locking Receptacle — May be used to supply electrical power for the operation of 120 and/or 240 Volt AC, 30 Amp, single phase, 60 Hz electrical, lighting, appliance, tool and motor loads.

10

BRIGGSandSTRATTON.COM

Page 10
Image 10
Briggs & Stratton 206405GS manual Features and Controls, B - Start Switch - Push to start the engine