ASSEMBLY
STEP 5:
Attach Wheel (A) to Caster
Fork (B) by using (1) axle (B4236),
(1)flat washer (K0017), (2) spacers (S3315), (1) push nut (K0199), and
(1)cotter pin (K0085). Next attach assembled Caster (C) to Hitch (D) by using (2) 1" washers (K0064) and (1) cotter pin (K0089). Attach Hitch Assembly (D) to Main Frame
(E) by using (4)
(D) and attach to the Mount Plate
(F) and lock jaws. Place (2) 7 cu. ft. canisters (G) into the Main Frame (E) and close lid.
D
E
F
C D
A
BG
BA
STEP 6:
Place Clamps (A) over each end of
C6" Hose (B). Attach one end of hose onto Blower Housing (C). Attach free end of hose over Inlet (D).
TIGHTEN CLAMPS!
8 | MODEL 37641401 - 04 | PeCo |