System Control Panel

The home generator control panel, located inside the generator housing, is shown below.

F G

Brief descriptions of the controls used during installation are:

ARemovable Panel — To assist with conduit connection.

BCircuit Breaker — Must be ON to supply power to the transfer switch.

CSet Exercise Switch — Used to set time of the exercise cycle.

DManual Over-Ride Switch — Used to manually start and stop the generator.

E15 Amp Fuse — Protects the DC control circuits.

FSystem Switch — Switches modes to OFF and AUTO.

GDigital Display — Displays running time in hours, and fault codes.

HVoltage Regulator — Used to adjust generator output voltage.

More information may be found in Controls in the Operator’s Manual.

System Switch

This two-position switch is the most important control on the home generator and is used as follows:

•“AUTO” position is the normal operating position. If a utility power outage is sensed, the system will start the generator. When utility power is restored, lets the engine stabilize internal temperatures, shuts off the generator, and waits for the next utility power outage.

•“OFF” position turns off running generator, prevents unit from starting and resets any detected faults.

15 Amp Fuse

Protects the home generator DC control circuits. If the fuse has ‘blown’ (melted open) or was removed, the engine cannot crank or start. Replace the fuse using only an identical ATO 15A fuse. One spare fuse is supplied with the unit. If fuse was blown or removed, you will need to reset the exercise timer (see Setting Exercise Timer).

Final Installation Considerations

Engine Oil

notice

Any attempt to crank or start the engine before it has been properly serviced with the recommended oil will result in equipment failure.

•Refer to Maintenance and engine manual for oil fill information.

•Damage to equipment resulting from failure to follow this instruction will void engine and generator warranty.

This engine is shipped from the factory pre-run and filled with non-synthetic oil (API SL 10W-30W). This allows for system operation in a wide range of temperature and climate conditions. Before starting the engine, check oil level and ensure that engine is serviced as described in the engine operator’s manual.

Coolant System

This engine is shipped from the factory filled with a 50-

50 mix of automotive (Dex-Cool™ orange) anti-freeze and water. This will provide optimum year round protection against freezing, boiling and corrosion. The coolant system incorporates a water heater that operates when ambient temperature is below 80ºF AND utility power is present at the transfer switch. Before starting the engine, check coolant level as described in the engine operator’s manual.

45000 specifications

The Briggs & Stratton 45000 is a powerful generator that stands out in the realm of portable power solutions. Designed for a variety of applications, it is an ideal choice for homeowners, outdoor enthusiasts, and professionals alike. With a robust engine and advanced features, it ensures a reliable source of electricity when you need it most.

One of the key features of the Briggs & Stratton 45000 is its impressive power output. It provides starting watts of 4,500 and running watts of 3,600, making it suitable for powering essential appliances during outages or for running tools on job sites. This generator is equipped with a durable 306cc engine that utilizes a reliable overhead valve (OHV) design for enhanced performance and efficiency. This engine type ensures lower oil consumption, reduced emissions, and quieter operation compared to traditional engines.

The generator's lightweight design and integrated handle make it highly portable. Weighing approximately 107 pounds, it is easy to transport, allowing for seamless movement from one location to another. The rugged wheels provide excellent maneuverability over uneven terrain, making it a perfect companion for camping trips, tailgating events, and outdoor projects.

Another notable feature of the Briggs & Stratton 45000 is its user-friendly control panel. Equipped with multiple 120V AC outlets, it allows users to connect various devices and appliances simultaneously. The addition of a USB port facilitates charging smartphones and tablets, catering to the modern user’s needs. The generator also includes a built-in circuit breaker to protect against overloads, ensuring the safety of connected devices.

Advanced technologies further enhance the performance and usability of the Briggs & Stratton 45000. For instance, it features a digital display that keeps users informed about the voltage output and running hours. An automatic shutoff function prevents engine damage by alerting users when oil levels are low. Additionally, the generator incorporates a pressurized lubrication system that enhances longevity and minimizes wear and tear.

To top it off, the Briggs & Stratton 45000 meets various safety standards, providing peace of mind for everyone using it. With all these features combined, the Briggs & Stratton 45000 stands as a reliable and efficient portable generator that meets the diverse power needs of users across various settings. Whether at home, on the job, or enjoying the great outdoors, this generator can be counted on to deliver dependable performance.

Briggs & Stratton 45000 system manual System Control Panel, Final Installation Considerations

Models: 45000