Troubleshooting, Adjustment & Service |
| |
Seat Adjustment |
| |
See Figure 28. The seat can be adjusted forward | Seat Adjustment | |
and back. Move the lever to the left, position the seat | ||
Lever | ||
as desired, and release the lever to lock the seat into | ||
| ||
position. |
|
Seat Adjustment (Suspension Seat)
See Figure 26. In addition to the forward and backward seat adjustment, models equipped with a suspension seat can be adjusted for lumbar support, suspension and back angle.
Forward and Backward Adjustment:Figure 28. Seat Adjustment
Move the forward / backward seat adjustment lever (A, Figure 29) away from the seat, position the seat as desired, and release the lever to lock the seat into position.
| Lumbar Adjustment: |
|
|
|
|
|
Turn the lumbar adjustment knob (B) until the desired |
|
|
| ||
amount of lumbar is achieved. |
|
| for |
| |
| Back Angle Adjustment: |
|
|
| ||
Turn the back angle adjustment knob (C) until the | B | ||||
| |||||
desired amount of back angle is achieved. |
|
| |||
| Suspension Adjustment: |
|
| A | ||
|
|
| |||
Turn the suspension adjustment knob (D) until the |
| ||||
| C |
| |||
display scale has a reading that matches the weight of |
|
| |||
the operator. | Not |
|
|
| |
|
| D |
| ||
|
| Figure 29. Suspension Seat Adjustment |
| ||
Ground Speed Control Lever Adjustm nt |
|
| |||
| A. Forward / Backward Seat Adjustment Lever |
| |||
The control levers can be adjusted in thr | ways. The | B. Lumbar Adjustment Knob |
| ||
C. Back Angle Adjustment Knob |
| ||||
alignment of the control levers, the plac m | nt of the |
|
| ||
| D. Suspension Adjustment Knob |
| |||
levers (how close the ends are to one another) and |
|
| |||
|
|
| |||
the height of the levers can be adjusted. |
|
|
|
| |
| To Adjust the Handle Alignment | Reproduction |
| |||
Loosen the mount bolts (A, Figure 30) and pivot the |
| C |
| ||
lever(s) (C) to align with each other. |
|
|
|
|
|
| To Adjust the Handle Placement |
|
|
| B |
|
|
|
| A |
| |
|
|
|
|
| |
Loosen the jam nuts and adjust the placement bolt |
|
|
| ||
(B) in or out to properly adjust the lever end spacing. |
|
|
| ||
| To Adjust the Handle Height |
|
|
|
|
|
Remove the mounting hardware and reposition the |
|
|
| ||
handle either up or down from its original position. |
| Figure 30. Control Lever Adjustment |
| ||
You will need to readjust the handle alignment as |
|
| |||
| A. Alignment Hardware |
| |||
described above. |
|
|
|
| |
|
|
| B. Placement Hardware |
| |
|
|
|
|
| |
|
|
|
| C. Ground Speed Control Lever |
|
36 |
|
|
| www.ferrisindustries.com | |