Section 3
3.3 TRACTOR (CONT'D)
Travel Speed: |
|
Forward | |
Reverse | |
3.4 CUTTER DECK |
|
The machine will travel at 7.5 mph for transport purposes. For best cutting performance the forward travel speed should be adjusted depending upon the cutting conditions.
Type: | Floating, Adjustable, |
| |
Construction: | |
................................................................................................... | plates |
True Cutting Width: | 36" (91.44 cm), 42" (106.68 cm) |
Cutting Height Adjustment: | Foot Operated Lever Adjustment from Operator's Seat, 1.50" to |
| 5.5" in 1/4"increments |
Cutter Blades: | 197 Thick, Milled Edge, Wear Resistant Marbain™ |
Blade Engagement: | Electric Blade Engagement Clutch with Control Panel Switch |
| Connected to the Cutter Deck through a Belt. |
Discharge Opening: | Extra Wide Discharge Opening with Spring Loaded Discharge |
| Chute and Turbo Baffle |
Spindles: | |
| Taper Roller Bearing, Low Maintenance with Top Access Grease |
| Fitting and Grease Overfill Relief Poppet |
Spindle Pulleys: | Cast Iron (SZC36A), Split Steel (SZC42A) with Easily Removed |
................................................................................................... | Taper Hubs |
Cutter Deck Belts: | |
SMZC36 | Scag Part Numbers - 483001 |
SMZC42 | Scag Part Numbers - 483002 |
Electric Clutch Type | Ogura Heavy Duty PTO Clutch Brake |
3.6 HYDRAULIC SYSTEM
Hydraulic Oil Filter | 10 Micron |
Hydraulic Reservoir | Cast Aluminum; 2 Quart Capacity |
3.7 PRODUCTIVITY
The following chart will aid you in determining how many acres your Scag mower will cut per day.
The chart is an estimate based on 8 hours per day cutting time at 6 MPH with a 20% allowance for overlap and turns.
Cutting Width: | 36" | 42" |
Acres Per Day: | 14 | 16 |
12
