Section 4
DECK RELEASE
LEVER
Figure 4-4 Deck Release Lever
HEIGHT ADJUSTMENT
PEDAL
Figure 4-5 Adjusting Cutting Height
4.14 Adjusting the Steering Levers
1.Position the seat to the desired location.
2.While in the operator's position with out the engine running, move both steering levers forward and reverse to check for full function control and comfort.
3.If adjustment of the steering levers is needed, use the following instructions to adjust.
A.Loosen the tension knob on the lever assembly.
B.Rotate the steering lever forward or backward to achieve the optimum operating position.
C.Tighten the tension knob and repeat on the opposite side.
D.While in the operators position, bring the steering levers out of the neutral lock position and check to make sure both levers are even before operating.
ROTATE
LEVER
TENSION
KNOB
Figure 4-6 Adjusting Steering Levers
4.The control handle can also be adjusted in two different positions. If necessary, remove the two bolts securing the control handle to the control lever. Install the handle in the desired position.
19
