5 MAINTENANCE

6 SPECIFICATIONS

By following a good maintenance program, your equipment will last for many years.

1.Consult the operating and maintenance instructions of the engine manufacturer for engine care and maintenance.

2.Always check the oil level of the hydraulic reservoir before operation. Operating the Log Splitter without an adequate oil supply will cause severe damage to the pump.

3.Change the oil filter after the first 25 hours of operation. Thereafter, change the oil filter every 100 hours or seasonally, whichever comes first.

4.If the wedge becomes dull or nicked, a grinder or sharpening tool can be used to sharpen it while still attached to the cylinder. If it is necessary to remove the wedge, the stripper plate (71)* must be taken off by removing the 3/8" bolts (68)*. Then remove the cylinder support (66)* by taking out the 3/8" bolts (63)*. Then remove the 1/2" x 3 1/2" bolt (51)* that connects the wedge to the cylinder. The return hose (53)* may need to be disconnected from the valve. Loosen hose clamp (18)* and pull the hose off the fitting. Lift up the cylinder carefully and slide the wedge out of the channel.

5.Clean the breather cap after 25 hours of operation. Clean it more often when operated in dusty conditions. To clean, remove the breather from the tank and flush with kerosene or liquid detergent to remove the dirt.

6.See also Repair and Maintenance Safety in the Safety Information section of this manual.

7.All replacement parts must meet manufacturer's specifications.

*See Parts Breakdown (Pages 15 - 17) in this manual.

Splitting Force:

 

22 Tons

Beam Size:

 

6" x 6"

Cylinder Size:

 

4" x 24"

Valve Type:

 

Auto-Return

Pump:

 

2-Stage, 11 GPM

Engine:

 

Honda 5.5 H.P. or

Filter:

Briggs & Stratton 6 H.P.

 

Replaceable

Hoses & Fittings:

 

Included

Tires:

4.80 x 8" Road Speed

Safety Chains:

 

Included

Ground Stand:

 

Included

Coupler:

 

2" Ball

Wedge Height:

 

7"

Cycle Time:

 

13 Seconds

Max. Log Length:

 

26"

Total Reservoir Capacity:

17 Quarts

Height:

 

39" Horizontal

Length:

 

62" Vertical

 

77 1/2"

Width:

 

44"

Built-In Log Cradle:

 

Yes

Shipping Weight:

 

T22H - 430 lbs.

 

 

T22B - 430 lbs.

Ideal case cycle times. Actual cycle times vary depending on temperature, engine speed, pump efficiency, altitude, etc.

14

Page 16
Image 16
Briggs & Stratton T22B & T22H manual Maintenance Specifications