CLEANING AND MAINTENANCE:

•Keep the appliance free and clear of combustible materials, gasoline and other flammable vapors and liquids.

•Keep the ventilation openings of the cylinder enclosure free and clear of debris.

•Visually check burner flames for proper operation (see pictorial in "Burner Assembly/Maintenance" under Proper Care and Maintenance). Spiders or other insects can nest in the burner causing gas blockage.

•For safe grilling and peak performance of your grill, perform these checks at least twice per year or after extended periods of storage.

•Be sure to tighten up all hardware (nuts, bolts, screws, etc.) at least twice per year.

CAUTION! Some parts may contain sharp edges. Wear protective gloves if necessary.

•Remove the cooking grills, heat distribution plates, and burners from inside your grill. Use a brush with hot water and detergent to remove excess residue. NEVER use a commercial oven cleaner. Rinse completely with water. Towel dry and replace all components as described in the assembly instructions.

BURNER ASSEMBLY/MAINTENANCE

•Although your burners are constructed of cast iron, they may rust as a result of the extreme heat and acids from cooking foods. Regularly inspect the burners for cracks, abnormal holes, and other signs of corrosion damage. If found, replace the burner.

•DO NOT obstruct the flow of combustion and ventilation air. Burner tubes can become blocked by spiders and other insects building their nests. Blocked burner tubes can prevent gas flow to the burners and could result in a burner tube fire or fire beneath the grill. To clean the Burner Assembly follow these instructions to clean and/or replace parts of burner assembly or if you have trouble igniting the grill.

1.Turn gas off at control knobs and LP cylinder tank valve.

2.Remove cooking grills and heat distribution plates.

3.Remove cotter pins from beneath each burner "foot" using a screwdriver or needle nose pliers.

4. Carefully lift each burner up and away from valve openings.

5. Use a narrow bottle brush or a stiff wire

bent into a small hook to run through each

 

Debris

burner tube and flame port several times.

 

 

NOTE: Wear eye protection when performing procedure 6.

6.Use compressed air to blow into burner tube and out the flame ports. Check each port to make sure air comes out each hole.

7.Wire brush entire outer surface of burner to remove food residue and dirt.

8.Check burner for damage, if any large cracks or holes are found replace burner. IMPORTANT: Burner opening must slide over valve nozzle.

9.Carefully replace burners.

10.Replace cotter pin beneath each burner and follow the "Gas Leak Testing" section of this manual. Relight burners to verify proper operation.

11.Replace heat distribution plates and cooking grills.

Valve Nozzle

Burner Orifice

PROPER BURNER OPERATION

16

Page 16 Page 18
Page 17
Image 17
Brinkmann 4425 owner manual Cleaning and Maintenance, Burner ASSEMBLY/MAINTENANCE
Page 16 Page 18

4425 specifications

The Brinkmann 4425 is a versatile and efficient gas grill that has garnered a reputation for its impressive performance and user-friendly features. Designed for both novice grillers and seasoned barbecue enthusiasts, it combines quality workmanship with innovative technologies that enhance the grilling experience.

One of the standout features of the Brinkmann 4425 is its robust construction. The grill is built with durable materials that ensure longevity and resilience against the elements. Its stainless-steel burners provide reliable heat output, capable of reaching high temperatures quickly and evenly. This ensures that food can be cooked to perfection every time, whether you’re searing steaks or slow-cooking ribs.

The Brinkmann 4425 is equipped with a generous cooking area, allowing for multiple items to be grilled simultaneously. The spacious grill surface is complemented by a warming rack, which helps keep finished foods warm while the rest of your meal cooks. This feature is particularly useful during large gatherings or barbecues, where multiple courses might be prepared.

Another noteworthy technology featured in the Brinkmann 4425 is its independent ignition system, which allows for easy lighting without the hassle of matches or lighters. The built-in ignition ensures that users can start grilling quickly and safely every time. Additionally, the grill's heat distribution system promotes even cooking across the entire cooking surface, minimizing the risk of hot or cold spots that can ruin a meal.

Portability is another advantage of the Brinkmann 4425. Fitted with sturdy, locking wheels, the grill can be easily maneuvered and secured, making it an ideal choice for those who enjoy grilling in different outdoor settings. Whether it’s tailgating, camping, or simply in your backyard, this grill is designed to go where you need it.

Moreover, the Brinkmann 4425 features a sleek and modern design. Its stainless-steel finish not only adds an appealing aesthetic but is also easy to clean, making maintenance a breeze. The grill is thoughtfully designed with ample side tables, providing extra space for food preparation, sauces, and tools.

In summary, the Brinkmann 4425 is a standout gas grill that offers a combination of durability, performance, and convenience. With its powerful burners, spacious cooking area, independent ignition system, and portability, it’s ideal for any grilling enthusiast looking for a reliable and efficient solution for outdoor cooking.
Top Page Image Contents