WARNING

FILLING THE LP GAS CYLINDER:

Allow only qualified LP gas dealers to properly fill or repair your LP gas cylinder.

New tanks should be purged prior to filling; inform LP gas dealer if you are using a new tank.

DO NOT allow the cylinder to be filled beyond 80% capacity. Over-filled tanks can create a dangerous condition. Over-filled tanks can build-up pressure and cause the relief valve to expel propane gas vapors. The vapor is combustible and if it comes in contact with a spark source or flame an explosion causing severe burns, bodily harm, or death could occur.

Always use a protective cylinder cap when grill is not connected to cylinder.

If you exchange a cylinder with a qualified exchange program, be sure the cylinder has a Type 1 valve and an over-filling prevention device (OPD).

INSTALLING THE LP GAS CYLINDER ONTO THE GRILL:

1.Check that the cylinder valve is closed by turning the knob clockwise.

2.Place the cylinder into the tank holder in the bottom of cabinet.

3.Orient the cylinder such that the valve opening faces the side burner, and so that the hose is not kinked or damaged.

4.Fully tighten the cylinder clamp underneath tank holder to secure tank.

5.Attach or detach regulator to the LP gas cylinder only when cylinder is at rest in tank holder.

HOSE AND REGULATOR:

Your grill is equipped with a Type 1 connection device with the following features:

1.The system will not allow gas flow from the cylinder until a positive connection to the valve has been made.

NOTE: The cylinder valve must be turned off before any connection is made or removed.

2.A thermal device that will shut off the gas flow if the device is subject to temperatures above 240°F to 300°F (115°C to 150°C). If this should happen, remove the entire regulator assembly and dispose of properly. A replacement regulator assembly can be purchased by contacting customer service at 800-527-0717. The cause of the excessive heat should be determined and corrected before using your grill again.

3.A regulator flow limiting device, when activated, restricts the flow of gas to 10 cubic feet per hour. If the flow limiting device is activated, perform Regulator Resetting Procedure.

Tank Holder

Cylinder Clamp

REGULATOR RESETTING PROCEDURE

1.Turn burner control knobs to "OFF”, turn off the cylinder valve and disconnect regulator from LP gas tank. Wait approximately two minutes.

2.Reattach regulator and slowly turn cylinder valve back on. The flow limiting device will now be reset.

6

Page 7
Image 7
Brinkmann 4425 owner manual Filling the LP GAS Cylinder, Installing the LP GAS Cylinder Onto the Grill, Hose and Regulator

4425 specifications

The Brinkmann 4425 is a versatile and efficient gas grill that has garnered a reputation for its impressive performance and user-friendly features. Designed for both novice grillers and seasoned barbecue enthusiasts, it combines quality workmanship with innovative technologies that enhance the grilling experience.

One of the standout features of the Brinkmann 4425 is its robust construction. The grill is built with durable materials that ensure longevity and resilience against the elements. Its stainless-steel burners provide reliable heat output, capable of reaching high temperatures quickly and evenly. This ensures that food can be cooked to perfection every time, whether you’re searing steaks or slow-cooking ribs.

The Brinkmann 4425 is equipped with a generous cooking area, allowing for multiple items to be grilled simultaneously. The spacious grill surface is complemented by a warming rack, which helps keep finished foods warm while the rest of your meal cooks. This feature is particularly useful during large gatherings or barbecues, where multiple courses might be prepared.

Another noteworthy technology featured in the Brinkmann 4425 is its independent ignition system, which allows for easy lighting without the hassle of matches or lighters. The built-in ignition ensures that users can start grilling quickly and safely every time. Additionally, the grill's heat distribution system promotes even cooking across the entire cooking surface, minimizing the risk of hot or cold spots that can ruin a meal.

Portability is another advantage of the Brinkmann 4425. Fitted with sturdy, locking wheels, the grill can be easily maneuvered and secured, making it an ideal choice for those who enjoy grilling in different outdoor settings. Whether it’s tailgating, camping, or simply in your backyard, this grill is designed to go where you need it.

Moreover, the Brinkmann 4425 features a sleek and modern design. Its stainless-steel finish not only adds an appealing aesthetic but is also easy to clean, making maintenance a breeze. The grill is thoughtfully designed with ample side tables, providing extra space for food preparation, sauces, and tools.

In summary, the Brinkmann 4425 is a standout gas grill that offers a combination of durability, performance, and convenience. With its powerful burners, spacious cooking area, independent ignition system, and portability, it’s ideal for any grilling enthusiast looking for a reliable and efficient solution for outdoor cooking.