WARNING

FILLING THE LP GAS CYLINDER:

Allow only qualified LP gas dealers to properly fill or repair your LP gas cylinder.

New tanks should be purged prior to filling; inform LP gas dealer if you are using a new tank.

DO NOT allow the cylinder to be filled beyond 80% capacity. Over-filled tanks can create a dangerous condition. Over-filled tanks can build-up pressure and cause the relief valve to expel propane gas vapors. The vapor is combustible and if it comes in contact with a spark source or flame an explosion causing severe burns, bodily harm, or death could occur.

Always use a protective cylinder cap when grill is not connected to cylinder.

If you exchange a cylinder with a qualified exchange program, be sure the cylinder has a Type 1 valve and an over-filling prevention device (OPD).

INSTALLING THE LP GAS CYLINDER ONTO THE GRILL:

1.Check that the cylinder valve is closed by turning the knob clockwise.

2.Place the cylinder into the tank holder in the bottom of cabinet.

3.Orient the cylinder such that the valve opening faces the side burner, and so that the hose is not kinked or damaged.

4.Fully tighten the cylinder clamp underneath tank holder to secure tank.

5.Attach or detach regulator to the LP gas cylinder only when cylinder is at rest in tank holder.

HOSE AND REGULATOR:

Your grill is equipped with a Type 1 connection device with the following features:

1.The system will not allow gas flow from the cylinder until a positive connection to the valve has been made.

Note: The cylinder valve must be turned off before any connection is made or removed.

2.A thermal device that will shut off the gas flow if the device is subject to temperatures above 240°F to 300°F (115°C to 150°C). If this should happen, remove the entire regulator assembly and dispose of properly. A replacement regulator assembly can be purchased by contacting customer service at 800-527-0717. The cause of the excessive heat should be determined and corrected before using your grill again.

3.A regulator flow limiting device, when activated, restricts the flow of gas to 10 cubic feet per hour. If the flow limiting device is activated, perform Regulator Resetting Procedure.

Tank Holder

Cylinder Clamp

REGULATOR RESETTING PROCEDURE

1.Turn burner control knobs to "OFF”, turn off the cylinder valve and disconnect regulator from LP gas tank. Wait approximately two minutes.

2.Reattach regulator and slowly turn cylinder valve back on. The flow limiting device will now be reset.

6

Page 7
Image 7
Brinkmann 4675 owner manual Filling the LP GAS Cylinder, Installing the LP GAS Cylinder Onto the Grill, Hose and Regulator

4675 specifications

The Brinkmann 4675 is a prominent offering in the world of outdoor cooking, designed to meet the needs of both casual grillers and serious barbecue enthusiasts. This versatile grill combines traditional grilling techniques with modern technology, making it an essential tool for backyard gatherings and outdoor feasts.

One of the standout features of the Brinkmann 4675 is its large cooking surface, which provides ample space for preparing multiple dishes simultaneously. With a total cooking area of approximately 700 square inches, it allows users to grill significant quantities of meat and vegetables at once. This generous space is beneficial for barbecuing for family events, parties, or tailgating.

The Brinkmann 4675 is equipped with a powerful burner system that provides consistent heat across the entire cooking surface. The grill typically features stainless steel burners that ensure durability and resistance to rust. This construction contributes to the grill's long lifespan and performance, allowing for even cooking and delivering perfect grill marks every time.

Another notable technology found in the Brinkmann 4675 is its ignition system. The grill often features an electronic ignition mechanism, ensuring a quick and hassle-free startup. This is an essential characteristic for those who may be impatient to get the grilling started, eliminating the frustration of struggling with matchsticks or lighter fluid.

Cooking versatility is further enhanced by the inclusion of various cooking modes. The Brinkmann 4675 often has an adjustable heat setting, allowing users to sear meats at high temperatures or cook more delicately at lower settings. This flexibility means that everything from steaks to vegetables can be prepared with ease.

The design of the Brinkmann 4675 emphasizes ease of use and functionality. Many models come with side shelves, providing extra space for food preparation and storage of grilling tools. Additionally, the grill often features a sturdy cart with wheels, making it easy to move around for optimal placement in your outdoor space.

Moreover, the Brinkmann 4675 is designed with user safety in mind. Many models incorporate features like heat-resistant handles and a secure lid to prevent accidents during operation.

In summary, the Brinkmann 4675 is a robust outdoor grill that combines ample cooking space, powerful burner technology, and user-friendly design. Its features make it suitable for a variety of cooking techniques, ensuring that all types of outdoor cooking enthusiasts can create delicious meals with confidence. Whether you're hosting a large gathering or enjoying a quiet evening cook-out, the Brinkmann 4675 stands out as a reliable choice for grilling perfection.