Brinkmann 816-3500 SERIES, 815-3500 Assembly Instructions, Proof of purchase will be required

ASSEMBLY INSTRUCTIONS

READ ALL SAFETY WARNINGS & ASSEMBLY INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR OPERATING YOUR FRYER.

Inspect contents of the box to ensure all parts are included and undamaged.

FOR MISSING PARTS, PLEASE CALL CUSTOMER SERVICE AT 1-800-527-0717.

An adjustable wrench is needed to assemble this fryer.

PARTS LIST:

1Owner’s Manual

1Fryer Stand

1Burner Assembly

1Hose & Regulator with Safety Tag

1Heat Shield

1Match Holder

1Air Shutter

1Spring

OPTIONAL PARTS: (depending on your model)

1 Boiling Pot and Lid

1Boiling Pot with Spigot and Lid

1Turkey Stand and Hanger

1Deep Fry Thermometer

17” Strainer Basket

114” Strainer Basket

110 qt. Pan and Basket

1Marinade Injector

Turkey Fryer Gas Cooker

(Proof of purchase will be required.)

Step 1

Insert male fitting through spring and air shutter. Keep narrow end of spring facing toward fitting. Attach burner to male fitting by screwing burner counter-clockwise onto fitting.

NOTE: Do not over-tighten the male fitting as the air shutter needs to move freely in order to adjust air intake. Check the attachment for proper connection every time propane tank is connected to fryer.

Burner

Air Shutter

Male
Fitting	Air Hole
	Spring

Step 2

Remove nut from bottom of burner assembly.

Step 3

Position the stand upside down as shown.

Step 4

Place burner assembly inside stand with threaded bolt protruding through

support strap as shown.

Step 5 Place Heat Shield on

support strap with threaded bolt protruding

through center hole.

Step 6

Thread nut onto bolt and securely tighten. Do not overtighten.

Step 7

Set fryer with burner assembly upright on flat surface. Make sure burner assembly is securely attached to fryer.

PROCEED TO “GAS LEAK TESTING” SECTION ON PAGE 8.

14