Brinkmann 822-B504-2 owner manual Operating Instructions, Hook Section

OPERATING INSTRUCTIONS

READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE OPERATING YOUR SOLAR LIGHT.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

Step 1

To form a hanger for the solar light, connect the hook section with one or two stand sections, depending on the height desired.

Hook Section Stand Sections

Step 2

Locate an area of solid ground where you can place your solar lights and insert ground stake.

Step or press down on ground stake to aid in driving stake into ground. Make sure ground stake is inserted all the way into ground.

NOTE: Ground can be softened by soaking area with water first.

Hanging Hook

Step 3

Once ground stake is firmly in place, insert hanging hook into center hole of ground stake.

Step 4
Hang light fixture from hanging hook. The	Ground Stake
photocell light sensor should point away
from other nighttime light sources.
Step 5	Ground Stake

Charge in direct sunlight for 10-12 FULL, SUNNY DAYS. The light will turn on automatically at night. Allow at least

10-12 cycles (i.e., 10-12 days and nights of charging and discharging) for the battery to charge to its full capacity.

3