Step 15

Attach the side burner assembly to the right side of the grill body. Insert four M6 X 10mm bolts (silver) into both right legs halfway. Place side burner assembly over bolts and slide toward front of grill, then tighten securely. Fasten side burner front panel to grill body with one

M6 X 10mm bolt (silver).

Step 16

Attach the hose heat shield to the right cart frame using two

M4 X 8mm bolts.

Step 17

Remove two bolts and washers from the side burner valve. Insert the side burner valve assembly through the hole in the side burner front panel, then firmly seat the valve nozzle into the burner venturi. Hold in place while you perform Step 18.

Warning: Never use your grill without leak testing all gas connections and hoses. See the section on “Leak Testing” in this manual for proper procedures.

29

Hose

Heat Shield

Burner Venturi

Side

Burner

Valve

Valve

Nozzle

Page 30
Image 30
Brinkmann Gourmet Series owner manual Hose