Step 3
Saturate charcoal with lighting fluid. With lid open wait 2 to 3 minutes to allow lighting fluid to soak into charcoal. Store charcoal lighting fluid safely away from the grill.
Step 4
Open the side air vents approximately half way. With grill lid open, stand back and carefully light charcoal and allow to burn until covered with a light ash (approximately 20 minutes).
WARNING: Charcoal lighting fluid must be allowed to completely burn off prior to closing grill lid (approximately 20 minutes). Failure to do this could trap fumes from charcoal lighting fluid in grill and may result in a
Step 5
With coals burning strong, close the lid. Allow the temperature to reach 225° on the heat indicator. Maintain this temperature for 2 hours.
Step 6
Increase the temperature to 400° on the heat indicator . This can be achieved by opening the side air vents and adding more charcoal and/or wood (see “Adding Charcoal/Wood During Cooking” section of this manual). Maintain this temperature for 1 hour then allow unit to cool completely.
NOTE: It is important that the exterior of the grill is not scraped or rubbed during the curing process.
IMPORTANT: To protect your smoker from excessive rust, the unit must be cured periodically and covered at all times when not in use. A smoker cover can be ordered directly from Brinkmann by calling
YOUR BRINKMANN GRILL KING DELUXE IS NOW CURED
AND READY FOR USE.
9
