Shelf Support
Brackets
Leg
M6 x 5 hex nut
M6 x 12 bolt
Step 10
Align shelf support brackets with holes on inside of legs. Attach to legs with M8 X 15 shouldered bolts.
NOTE: To lower shelf, lift off of top bolt and lower. To raise, lift shelf up and lock on top bolt.
Step 11
To attach all four air vent dampers to insides of lid and body, place vent dampers on the inside of the unit with the adjustment tab sticking through one of the air vent holes. Using M6 x 12 bolts and M6 X 5 hex nuts, secure vent dampers to the unit. Do not overtighten the hex nuts as this will make the vents difficult to open and close.
Step 12
Install heat indicator in lid by aligning tabs on heat indicator with slots in the opening on front of lid. Insert and rotate clockwise until the word “BRINKMANN” on heat indicator is at bottom of dial.
6
