Step 11
Attach one half of each hinge to the outside back of the body using
6 X 28 mm Phillips head bolts and
6 X 5 mm hexagonal nuts. Thread bolts into nuts but do not tighten. Attach the other half of each hinge to the outside back of the lid using 6 X 28 mm Phillips head bolts and 6 X 5 mm hexagonal nuts. Thread bolts into nuts but do not tighten.
Step 12
Rest lid on the body and align hinges to insert hood pivot pins. Insert cotter pins into hood pivot pins and bend ends out slightly. Tighten all hinge screws on lid and grill body until secure.
Step 13
Slide charcoal grate adjuster arm onto control arm. Insert adjuster lock pin and spring into hole in end of adjuster arm as illustrated and tighten securely.
NOTE: With the adjuster arm trigger at its lowest level, tighten adjuster lock pin clockwise into the end hole of adjuster arm.
Step 14
With the charcoal grate at its lowest level, slide the adjuster lock pin into the first hole of the adjuster arm guide. Attach adjuster arm guide onto side of grill and thread 6 X 15 mm Phillips head bolts into welded nuts on inside of grill. Tighten securely.
Cotter Pin
Hood Pivot Pin 
Control |
|
Arm | Adjuster Arm |
|
Adjuster Lock Pin
Adjuster
Arm Guide
7
