7. To light the left and right
burners, push and turn
control knobs to HIGH.
Follow Step 6.
8. Refer to owner’s manual
for match lighting
procedure.
R
for
GH.
igniter and
onds to light burner.
does not occur in
onds, turn control knob
o OFF, wait 5 minutes to allow gas
to dissipate and repeat lighting
procedure.
30
Step 22
Remove igniter cap and insert
battery with positive end of battery
toward igniter cap. Replace igniter
cap and make sure the igniter is
working properly.
Step 23
Attach the loop strap bracket onto
the base panel using two M6 X
12mm bolts.
Igniter Cap Battery
ProSeries 2210 (Assembled)