Child Seat Functions

instructions on pages 26 - 27.

Adjusting Harness Buckle Position

This child seat allows the buckle to be adjusted to one of three positions based on the weight of the child. Properly adjusting the buckle increases comfort and A safety.

IMPORTANT:

This child seat is shipped with the buckle in position 1 (Fig. A). Use buckle position 1, 2, or 3 that is closest

to but not underneath your child. Do not use buckle position 3 in rear-facing mode.

In rear-facing installations, the LATCH strap or vehicle belt must rest IN FRONT OF the child seat buckle B when using buckle slots 1 or 2 (Fig. A). If the LATCH

strap is not in this position, pull the LATCH strap and connectors from behind the buckle strap and re-thread accordingly.

WARNING! This child seat should not be used forward- facing for children less than one year of age and weighing less than 20 lbs (9.1 kgs).

1Recline the child seat.

2Locate the metal buckle strap retainer on bottom of the child seat.

3Pull retainer away from child seat to loosen.

4Turn the retainer so the short side will go through the slot in the child seat shell (Fig. B).

5Push the retainer through slots in the shell and cover to the top of the child seat.

6Locate slot in cover and shell for desired harness buckle location.

7Push the buckle retainer so the short side will go through the slot in the cover and child seat shell.

8Pull harness buckle away from child seat until tight then verify the strap is not twisted and the release button is facing out.

Securing Your Child

Securing Your Child

 

 

Once the child seat has been installed in the vehicle

 

and adjustments have been made, follow these

 

instructions to secure the child.

 

1

Loosen the harness by lifting the harness

 

 

adjuster lever while pulling both shoulder straps

 

 

forward (Fig. C).

C

2

Release the chest clip by squeezing the tabs

 

and sliding pieces apart (Fig. D).

 

3

Unfasten the harness buckle by pressing the

 

 

release button and sliding the tongues out.

 

4

Move the harness straps to the side of the child

 

 

seat. Use the harness holder located on the

 

 

straps and side of the cover to aid in holding

 

 

the straps.

d

5

Place child in the child seat.

6Position the harness straps around the child and fasten the harness buckle (Fig. E) and chest clip (Fig. F).

Proper connection of the harness buckle is confirmed with an audible click after inserting each buckle tongue (see diagram below).

E

CLICK x 2

f

38

39

Page 21
Image 21
Britax 50 manual Adjusting Harness Buckle Position, Instructions on pages 26

50 specifications

The Britax 50 is a leading vehicle safety seat designed to ensure the utmost protection for young passengers. Renowned for its comprehensive safety features, the Britax 50 stands out in a crowded market, delivering top-notch security and comfort.

One of the key features of the Britax 50 is its innovative SafeCell Impact Protection system. This technology includes a series of components designed to work in harmony to provide enhanced protection during a collision. The SafeCell base is engineered to compress and lower the center of gravity, which helps to reduce the risk of injury. Additionally, the integrated crumple zones absorb crash forces, further safeguarding your child.

Another notable characteristic of the Britax 50 is its unique head safety technologies. The Advocate model specifically features a versatile headrest, which provides superior side impact protection. The headrest can easily adjust to accommodate your child's growth while maintaining an optimal position to shield their head and neck during any impact.

Comfort doesn’t take a backseat with the Britax 50. The seat is equipped with plush padding and premium fabrics designed for both softness and durability. The seat’s design is also tailored to offer ample legroom, ensuring that children remain comfortable during long travels. The easy-to-remove cover allows for hassle-free cleaning, which is a significant advantage for parents managing spills and messes.

Installation of the Britax 50 is simplified through its User-Friendly Belt-Guide System. Parents can easily secure the seat in various vehicles without confusion. The ClickTight Installation feature is a standout, providing a clear and reliable way to ensure the seat is properly mounted using the vehicle seat belt.

The Britax 50 also comes with multiple recline positions, providing maximum comfort for infants and toddlers alike. The seat can be configured to various angles, ensuring optimal safety and comfort as your child grows.

In summary, the Britax 50 combines cutting-edge safety technologies, comfort, and user-friendly features, establishing itself as a solid choice for parents prioritizing their child’s wellbeing on the road. With its reputation for excellence and commitment to safety, the Britax 50 is more than just a car seat; it represents peace of mind for families everywhere.