Child Seat Functions
Chest Clip
Fastening the Chest Clip: Fasten the chest clip by pushing the two halves together until a positive click is heard (Fig. A).
Releasing the Chest Clip: Squeeze the |
|
middle tab together and pull apart the two | A |
pieces (Fig. B). |
Adjusting the Chest Clip: Slide chest clip up or down on harness so it is positioned at the middle of the child’s chest, level with the child’s armpits.
Harness Buckle
Fastening the Harness Buckle: Hold the harness buckle with one hand. Use the other B hand to insert one buckle tongue at a time into
the harness buckle (Fig. C).
NOTE: Proper connection is confirmed with |
|
an audible click after inserting each buckle |
|
tongue. |
|
Releasing the Harness Buckle: Brace |
|
the rear of the harness buckle with one |
|
hand. Press the release button and slide | C |
both tongues to remove from the buckle | |
(Fig. D). |
|
IMPORTANT: Periodically clean the harness buckle to ensure safe operation. See pg 44.
D
Child Seat Functions
Adjusting Harness Slot Height
IMPORTANT: See Important Harness Adjustments on pages 6 – 7 for instructions on proper harness fit based on your child’s height and weight.
1 | Loosen the harness by lifting the harness |
|
| adjuster lever while pulling both shoulder straps |
|
| forward as far as possible (Fig. E). | E |
2 | From the rear of the child seat, unhook the | |
| shoulder harness from the harness yoke (Fig. F). |
|
3 | Pull straps through the shell, foam, and cover to |
|
| the front of the child seat. |
|
4 | Thread the harness straps through the |
|
| appropriate harness slots in the cover, foam, |
|
| and child seat shell (Fig. G). |
|
5 | Reattach harness straps to the harness yoke | F |
| (Fig. F). | |
6 | Pull |
|
| ||
| harness. |
|
|
|
7Verify all straps are threaded at the same height and are not twisted.
G
36 | 37 |