Britax Monarch manual Adjustments, Reclined Backrest Position, Upright Backrest Position

Adjustments

Adjusting the Backrest

Use the two-position recline flap to adjust the back angle of the booster seat.

1 Reclined Backrest Position:

Pull out the recline flap and slide down until in reclined position. (Fig. A)

A

2	Recline the backrest until the recline
	flap lies flat along the back of the

vehicle seat. (Fig. B)

WARNING: Do not recline the backrest farther than the recline flap will allow. This could cause the backrest to become loose or unstable in the event of a crash.

3 Upright Backrest Position:

Pull recline flap out and slide up until in upright position, flush with backrest. (Fig. C)

WARNING: Whether in reclined or upright position, recline flap should always be in full contact with the vehicle seat when booster is installed.

B

C

11