Using the Booster Seat

Securing the Child

1 Thread the vehicle shoulder belt through the red belt guide on the head rest closest to the retractor.

2 Pull the vehicle belt across the child’s chest to the opposite lap-belt guide nearest the seat buckle.

3 Pull the lap-belt section under both arm rests and over the red belt guides so that the belt lays flat on the child’s lap.

Straps should be tight and not twisted. 4 Remove all slack from lap and shoulder portions of the vehicle belt to ensure a

snug fit.

IMPORTANT: When properly installed, the vehicle belt buckle does not rest between the red belt guide and the arm rest on the base.

CorrectIncorrect

Using the Retractable Cup Holders

Retractable cup holders are located on each side of the base of the seat.

To use the cup holder, swivel it outward from front to back.

To store the cup holder, swivel it inward from back to front.

IMPORTANT: DO NOT step on or put excess weight on the cup holder as it could cause the cup holder to break.

CAUTION: Do not use with hot liquids as it may burn your child.

14

Page 14
Image 14
Britax Monarch manual CorrectIncorrect