CAT. CO250LBT

CO

TOP VIEW

SIDE VIEW

MOUNTING

BRACKET & RING

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5.1”4.4”

 

 

 

 

 

4.4”

 

 

 

 

1.6”

 

 

 

 

 

ARCHITECTURAL AND ENGINEERING SPEC

The carbon monoxide alarm shall be a BRK Model CO250LBT and shall provide at a minimum the following features and functions:

1.An electrochemical CO sensor.

2.The unit shall be capable of self restoring.

3.The unit shall have an “End of Life” signal. This signal should be capable of temporarily being silenced for up to 2 days. After about 2 days, the signal will resume. After about 2-3 weeks the signal cannot be silenced.

4.Powered by a supervised 9V Lithium battery that will power the alarm for at least 5 years and a solid state piezo horn rated at 85dB at 10 ft.

5.A visual LED power-on indicator to confirm unit is receiving power or is in alarm.

6.A test/silence button to check all alarm functions and to silence any nuisance alarms. In addition, the unit shall have a low battery silence feature to quiet the low battery chirp for up to eight hours.

7.A tamper proof mounting bracket that prevents removal of the alarm from the wall or ceiling using a tamper proof spanner screw. A tamper proof spanner screwdriver bit is to be provided. In addition a tamper resistant locking pin should be provided that locks alarm cover to prevent removal battery.

8.The CO sensor is adjusted not to detect CO levels below 30 PPM and will not alarm when exposed to constant levels of 30 PPM for 30 days. It will alarm at the following levels: 400 PPM CO between 4 and 15 minutes, 150 PPM CO between 10 and 50 minutes and 70 PPM CO between 60 and 240 minutes.

9.The unit shall be capable of operating between 40°F (4°C) and 100°F (38°C) and relative humidity between 10% and 95%.

10.The unit shall contain mounting hardware and shall be listed for wall or ceiling mounting.

11.The unit shall at a minimum meet the requirements of UL2034, NFPA 720, NFPA 101, ICC.

INSTALLATION OF ALARM

Installation of this CO alarm must conform to NFPA 720. Always check your local building codes. Follow all instructions for placement as outlined in the user’s manual in sections titled “Recommended Locations for CO Alarms” and “Locations to Avoid for CO Alarms”.

THE PARTS OF THIS CO ALARM

TECHNICAL SPECS

Alarm Dimensions:

5.1”W x 4.38”H x 1.64”D

Weight:

6.3 oz

Operating Voltage:

9V Lithium Battery Powered)

Temperature Range:

40°F (4°C) to 100°F (38°C)

Humidity Range:

10% to 90% relative humidity (RH)

Audio Alarm:

85dB at 10 feet

Test/Silence:

Electronically simulates carbon monoxide condition,

 

causing the unit to alarm. Press and hold test/silence

 

button

Alarm Reset:

Automatic when CO clears

CO Sensor:

Electrochemical

Indicator Lights/Sounds:

DC Power:

Intermittent Red LED

Local Alarm:

Audio alarm and rapidly flashing Red LED

Listing:

Listed to UL2034 Standard

SHIPPING SPECS

Individual Carton Dimensions

4.38”L x 1.88”W x 4.57”H

Weight

0.50 lbs.

Cube

0.02 ft3

UPC

0 29054 00952 4

Master Carton Dimensions

12.63”L x 6.13”W x 5.19”H

Master Pack

6

Weight

3.24 lbs.

Cube:

0.23 ft3

I2of5:

600 29054 00952 6

Pallet Information

 

Cases per Layer

30

Number of Layers:

8

Cases per Pallet:

240

Units per Pallet:

1440

Cube:

45.1 ft3

Weight:

843 lbs.

Alarm Secured with

Tamper Proof

Tamper Proof Bracket

Spanner Screw & Bit

 

11

3

12

1

2

3

4

1.“Open Here”

2.“No Battery” tab

3.Test/Silence button

4.CO alarm base

5.Standard screw mounting slots

6.Install 9V battery here

7.Locking pin slot

8.Locking pin: Remove and insert in 7

9.Tamper proof bracket

10.Tamper proof ring

11.Tamper proof spanner screw

12.Tamper proof spanner bit

Tamper Proof Locking Ring

Tamper Proof Bracket

Tamper Proof Screw

Tamper Proof Screw

9

Mounting Hole

Mounting Hole

 

 

Standard Screw

10

Mounting Holes

 

6

7

5

7

 

 

 

 

 

 

 

 

8

©2011 BRK Brands, Inc. a Jarden Corporation Company (NYSE: JAH)

3901 Liberty Street Road

Aurora, IL 60504-8122 All rights reserved

First Alert is a registered trademark of the First Alert Trust

brkelectronics.com BRK is a registered trademark of BRK Brands, Inc. CM3117

Page 2
Image 2
BRK electronic C0250LBT manual Architectural and Engineering Spec, Installation of Alarm, Technical Specs, Shipping Specs

C0250LBT specifications

The BRK electronic C0250LBT is an innovative smoke and carbon monoxide (CO) alarm designed to enhance safety in residential and commercial spaces. This device combines advanced technology with user-friendly features, making it an essential component of modern home safety systems.

One of the standout features of the C0250LBT is its advanced photoelectric smoke sensor. This technology is highly effective at detecting smoldering fires, which can produce large amounts of smoke and are often the most dangerous. The photoelectric sensor is less prone to false alarms compared to traditional ionization smoke detectors, making it a reliable choice for families.

Another critical characteristic of the C0250LBT is its ability to detect carbon monoxide, a colorless, odorless gas that can be deadly. The unit is equipped with a high-sensitivity electrochemical CO sensor that responds quickly to even low levels of CO, providing an added layer of protection for occupants.

The C0250LBT also features a Bluetooth connectivity option, allowing users to connect the alarm to their smartphone through a dedicated app. This feature provides real-time notifications, enabling users to monitor the alarm's status remotely. Additionally, users can conduct self-tests or silence alarms directly from their mobile devices, enhancing convenience and user interaction.

The device is designed with an easy-to-read LED display that shows the current status of the alarm and alerts the user to any detected hazards. It also has a built-in voice alert system that clearly announces the type of hazard detected, which is crucial for quick response during emergencies.

The C0250LBT is equipped with a long-lasting battery life, ensuring that the alarm remains operational even during power outages. The unit's battery is designed to last for many years, reducing the need for frequent replacements and ensuring that safety is not compromised.

Installation of the C0250LBT is straightforward, as it can be mounted on walls or ceilings with minimal effort. The sleek design and compact size enable it to blend seamlessly into various environments, making it visually unobtrusive.

Overall, the BRK electronic C0250LBT combines cutting-edge technology, reliable sensors, and user-friendly features, making it an ideal choice for anyone looking to enhance their fire and carbon monoxide safety. Its commitment to providing peace of mind in emergency situations underscores its place as a vital household appliance.