CONTENTS

 

Safety Precautions ...................................................................

2

Model and Serial No. Identification .........................................

2

Transporting Compactor ..........................................................

2

Manually Raising and Lowering Ram ......................................

2

Troubleshooting Guide ......................................................

3 & 4

Component Replacement ...............................................

5, 6 & 7

Greasing Compactor Mechanism .............................................

7

Wiring Diagrams ......................................................................

8

Parts Lists ....................................................................

9 thru 12

SAFETY PRECAUTIONS

 

ALWAYS UNPLUG COMPACTOR FROM WALL OUTLET BEFORE SERVICING.

The service information is intended for use by a service technician who is familiar with proper and safe procedures to be followed when repairing electrical appliances and who is equipped with proper tools and testing devices. Repairs attempted or made improperly can result in personal injury or property damage. Hazards may develop from improper assembly or adjustments. While making repairs, persons not having the proper background may subject themselves to the risk of injury or electrical shock which can be serious or even fatal.

IMPORTANT - NOTE TO THE CONSUMER

If you perform service on your own Broan products, you must assume responsibility for personal injury or property damage which may result.

MODEL AND SERIAL NO.IDENTIFICATION

The specification label with model and serial numbers is located on the inside of the cabinet. It is visible after opening the drawer.

TRANSPORTING COMPACTOR

When transporting compactor, the ram should be electrically or manually extended down into the drawer, preferably against a load of stacked newspapers or other suitable material. If this is not done, damage to the trunnion nut may occur.

Never transport compactor on its back or front. Damage to the gearbox may occur. If it cannot be transported upright, it is preferable to place it on its side.

MANUALRAISINGAND LOWERING OF RAM

Unplug compactor cord from wall socket. Remove back panel. The ram may be raised or lowered manually by using a 15/16" socket to turn the drive screw nut. Clockwise will lower ram,

BAG INSTALLATION

DO NOT use plastic bags other than those which have been designed for use in this compactor. Unauthorized bags can become caught in the mechanism.

With the drawer extended to the second stop, release the container latch and swing open door. Slide bag into drawer from front to back. Fold bag over top rim of drawer on all sides.

PREPUNCHED HOLES

Press bag into all corners of the drawer. Smooth and shape the bag carefully - this will prevent the bag from being torn by the ram during compaction.

DRAWER BUTTONS

Using buttons on side of drawer, button bag in place by using prepunched holes in side of bag. NOTE: If you have difficulty installing bag, move drawer to second stop by lifting front of drawer slightly and pulling forward (place on rug or other surface to protect floor). This

will clear back of container from housing for easier bag installation.

counterclockwise will raise it.

15/16”

SOCKET

2

Swing door shut and latch it. Bag is locked between door flange and drawer. When door is closed and latched properly, door guide “V” will be snug in “V” groove in drawer flange. Bag should be captured in “V” guide. Failure to align “V” properly or to latch drawer to door will cause the compactor to function improperly.

“V” GROOVE

CONTAINER

LATCH