8. HORIZONTAL DISCHARGE INSTALLATION (INTERNAL BLOWER(S) HOOD ONLY)
All internal blower hoods are factory shipped with the blowers mounted for a vertical discharge configuration. For a horizontal discharge configuration, disassemble the blower(s) from the inner top of the hood and mount it (them) to the inner back panel of the hood. The procedure below applies for one or two blowers.
LEFT SIDE MOUNTING
SCREW LOCATION
Using a 5/16” socket, remove all blower mounting screws from the inner top of the hood. Keep the screws for further use.
RIGHT SIDE
MOUNTING SCREW
LOCATION
HD0282
HD0269
Slide the blower to disengage its flange from the retaining bracket.
HD0270
Rotate the blower and engage its flange in the back wall retaining bracket.
Using a 5/16” socket and the screws previously removed, secure the blower to the hood.
RIGHT SIDE
MOUNTING SCREW
LOCATION
LEFT SIDE MOUNTING
SCREW LOCATION
HD0288 | HD0289 |
|
- 9 -
