9. OPERATION

Always turn your blower on before you begin cooking to establish an air flow in the kitchen. Let the blower run for a few minutes to clear the air after you turn off the range.

HC0016

A

B

C

D

E

A)Blower Delay switch

B)ON blower/Speed control switch

C)OFF blower/Filter maintenance switch

D)OFF lighting

E)Halogen light switch

A. BLOWER DELAY SWITCH:

When a speed is selected, press the delay switch to activate the delay function. The corresponding speed indicator LED will start flashing to indicate this function is activated. The fan will continue to operate for 5 minutes and will stop automatically. To cancel the delay function, press the blower delay switch once again; the blower will then work in normal mode.

NOTE: The blower speed can be increased—or decreased—during delay mode without starting another 5-minute cycle.

B. ON BLOWER/SPEED CONTROL SWITCH:

Press this switch to turn on the blower at the last selected speed. To change the blower speed, press the switch again until the desired speed is obtained.

NOTES: 1. Each time you press the speed control switch, the speed changes by increments of 1 (e.g.: speed 1 to speed 2, to speed 3, and then speed 4.) From the fourth speed, the speed goes down to level 1.

2.The last speed used is kept in memory so that when the unit is turned on, it will return to the last setting except the fourth, the next time the blower will be turned on, it will return to speed 3.

HEAT SENTRY™

This hood is equipped with a Heat Sentry thermostat. This thermostat is a device that will turn on or speed up the blower if it senses excessive heat above the cooking surface.

1)If blower is OFF—it turns blower ON to speed 3.

2)If blower is ON at a lower speed setting—it turns the blower up to speed 3. If blower is at Boost, HEAT SENTRY turns blower down to speed 3.

When HEAT SENTRY is activated, the first and the last speed blower LEDs are flashing alternately. When the temperature level drops to normal, the blower will return to its original setting.

!WARNING

The HEAT SENTRY can start the blower even if the hood is turned OFF. In this case, it is impossible to turn the blower OFF with blower switch. To prevent the blower from starting, turn off power at the main electrical panel.

C. OFF BLOWER/FILTER MAINTENANCE SWITCH:

Press this switch to turn off the blower. Pressing this switch also cancels the delay function (if activated).

NOTE: After 25 hours of operation, all blower LEDs will flash during 30 seconds to indicate the filters need to be cleaned in order to maintain efficient hood operation. The LEDS will continue to flash until the function is reset by pressing on this switch for 3 seconds.

D. OFF LIGHTING:

Press this switch to turn off lighting.

E. HALOGEN LIGHT SWITCH:

Press this switch to turn on the halogen lamps. The lighting intensity changes by increments of 1 (e.g.: Press once for low intensity, once again to get more, up to three times.) From the higher intensity, press once to go back to the lower intensity.

NOTE: The last lighting intensity used is kept in memory. The next time the halogen lamps will be turned on, they will light with the last intensity used.

RESET CONTROL PROCEDURE:

If ever the control locks up, turn off power at the main electrical panel for 5 seconds. Then, turn on power at the main

electrical panel. The control will be reset.

- 10 -

Page 9 Page 11
Page 10
Image 10
Broan E66142SS, E66136SS, E66130WH, E66130BL, E66130SS manual Operation, Heat Sentry, OFF Lighting
Page 9 Page 11

E66130SS, E66130BL, E66130WH, E66136SS, E66142SS specifications

Broan has long been recognized for its commitment to quality and innovation in the realm of kitchen ventilation. Among its impressive lineup of range hoods, the E66136SS, E66130WH, E66130SS, E66130BL, and E66142SS models stand out as exceptional choices that cater to a variety of culinary needs and design preferences.

The E66136SS is a stunning 36-inch stainless steel range hood that offers both style and performance. This model is equipped with a powerful 600 CFM blower, ensuring that smoke and odors are effectively vented away from your kitchen. Its sleek, contemporary design incorporates a stainless steel finish that complements modern kitchen aesthetics. The intuitive electronic control panel provides users with three-speed settings, allowing for customized airflow based on cooking intensity.

In a similar vein, the E66130 series, which includes E66130WH, E66130SS, and E66130BL, delivers versatility with its three different finishes: white, stainless steel, and black. Each model features the same robust 600 CFM blower, perfect for larger cooking spaces. The 30-inch size is ideal for standard ranges while offering a wide capture area for better ventilation. All models in this series also incorporate a convenient, easy-to-clean stainless steel mesh filter that captures grease and can be washed in the dishwasher.

Additionally, the E66142SS model, measuring 42 inches, is designed for those seeking a more extensive coverage area. This hood, too, features strong ventilation power with its 600 CFM capabilities. The design promotes substantial air movement while maintaining a quiet operation, allowing for a more enjoyable cooking experience without disruptive noise.

All models in the Broan E661 series are equipped with innovative LED lighting that illuminates the cooking surface, providing safety and visibility while cooking. This energy-efficient lighting not only enhances aesthetics but also reduces energy costs when compared to traditional incandescent bulbs.

Installation is made easier with the versatile design of these range hoods, as they can be installed either under cabinets or as wall-mounted units. Together, the Broan E66136SS, E66130WH, E66130SS, E66130BL, and E66142SS range hoods combine performance, style, and user-friendliness, making them excellent choices for any modern kitchen.
Top Page Image Contents