11.LIGHT BULBS
This hood must use 120V, 50W max., type MR16, GU10 shielded halogen lamps. (Purchase separately).
!WARNING
In order to prevent the risk of personal injury, do not install a lamp identified for use only in enclosed fixtures.
NOTE: The rings must be removed from bottom banel before installing halogen lamps.
11.1Install the lamps by placing the bulb leads into their grooves in the socket and gently push upward and turn clockwise until secured.
HE0047
11.2Install trim rings by pushing upward.
HO0034
!WARNING
In order to prevent the risk of personal injury, the halogen lamps must be cooled down before removing them.
11.3To remove lamps, gently push upwad and turn counterclockwise to disengage bulb leads from their grooves.
HE0047
- 11 -
