Broan E662 installation instructions Use And Care, Avoid when choosing a detergent

Models: E662

1 16
Download 16 pages 3.38 Kb
Page 13
Image 13
13. USE AND CARE

13. USE AND CARE

Grease filters and side panels.

The grease filters and the bottom panel should be cleaned frequently. Use a warm detergent solution.

Remove grease filters by pushing them towards the back of hood and rotating downward.

Clean all-metal filters in the diswasher using a non-phophate detergent. Discoloration of the filter may occur if using phosphate detergents, or as a result of local water conditions — but this will not affect filter performance. This discoloration is not covered by the warranty.

When cleaning the hood, never spray cleaning agent directly on the controls; spray it on the cleaning cloth and wipe the control with it. Spraying cleaning agent directly on the control will cause unexpected keyboard activation.

STAINLESS STEEL CLEANING:

Do: - Regularly wash surfaces with clean cloth or rag soaked with warm water and mild soap or liquid dish detergent.

-Always clean in the direction of original polish lines.

-Always rinse well with clear water (2 or 3 times) after cleaning. Wipe completely dry.

-You may also use a specialized household stainless steel cleaner.

Don’t: -Do not use any steel or stainless steel wool or any other scrapers to remove stubborn dirt.

-Do not use any harsh or abrasive cleasers.

-Do not allow dirt to accumulate.

-Do not let plaster dust or any construction residues reach the hood. During construction or renovation, cover the hood to make sure no dust sticks to stainless steel surface.

Avoid: when choosing a detergent

-Any cleaners that contain bleach will attack stainless steel.

-Any products containing : chloride, fluoride, iodide, bromide will deteriorate surfaces rapidly.

-Any combustible products used for cleaning such as acetone, alcohol, ether, benzol, etc., are highly explosive and should never be used close to a range.

PAINTED FINISH:

Clean with warm water and mild detergent only. If discoloration occurs, use a good enamel polish such as automotive polish. (DO NOT use rough abrasive cleaner or porcelain cleaner).

- 13 -

Page 13
Image 13
Broan E662 installation instructions Use And Care, Avoid when choosing a detergent