2.2 OPERATING ACCGSC1 CONTROLLER

2.2.1 ACCGSC1 CONTROLLER DESCRIPTION
2.2.2 USING ACCGSC1 CONTROLLER
• OFF: To stop the unit, slide the button on this position.
• LOW: For a day-to-day usage,slide the button on this position.
The unit then will operate on low speed, providing 70 cfm.
• HIGH: For a high speed operation, slide the button on this position.
Generally used when more ventilation is required, such as parties,
smokers, or for a 6-bedroom house. This mode provides 105 cfm.
2. CONTROLS
VC0059
High
Low
OFF
Reset Filter
Filter Maintenance
Power
POWER INDICATOR:
LIGHTS UP WHEN SLIDE
SWITCH IS IN THE HIGH OR
LOW POSITION.
FILTER MAINTENANCE
INDICATOR:
FLASHES EVERY MINUTE TO
INDICATEIT IS ON DUTY.
FLASHES EVERY SECOND
WHEN IT IS TIME TO
REPLACE PREFILTER.
LED STAYSLIT WHEN IT IS
TIME TO REPLACE FILTER
AND PREFILTER.RESET FILTERHOLE:
ONCE THE MAINTENANCE DONE, RESET THE FILTER
MAINTENANCEINDICATOR BY CAREFULLYINSERTING A SMALL
ROD (E.G.: PAPER CLIP) IN THE RESET FILTER HOLE,
FOR 1 SECOND. THE FILTER MAINTENANCE INDICATOR
WILL TURN OFF. REFER TO THE FILTER MAINTENANCE
RECOMMENDATIONSIN SECTION 3.
- 5 -
OFF:
UNIT IS OFF.
Low:
UNITISOPERATINGAT
ITS LOW SPEED.
HIGH:
UNITISOPERATINGAT
ITS HIGH SPEED.

2.1 MAIN SWITCH

All units are equipped with a 3-position main switch, located on the front panel. The
unit is intented for use with a wall controller (provided, see below). The main switch
is to remain in either the “OFF” or “Normal/Remote” modes ONLY. The “Normal/Remote”
mode allows the homeowner to operate the product from the wall controller (supplied
with the unit), typically mounted near a thermostat or other convenient location.
OFF:
UNIT IS OFF AND
DOOR IS
UNLOCKED.
NORMAL/REMOTE:
UNITISOPERATINGON
LOW SPEED. THIS IS THE
CORRECT POSITION
WHEN THE WALL
CONTROLLER IS USED.
BOOST:
UNIT IS OPERATING
ON HIGH SPEED.
VC0053