1. INSTALL DUCTWORK
Plan where and how the ductwork will be installed. Install
NOTE: When performing vertical exhaust ductwork, there must be at least 14” high free inside cabinet in order to allow cabinet blower installation.
The minimum hood distance above cooktop must not be less than 24”. A maximum of 30” above cooktop is highly recommended for best capture of cooking impurities.
Distances over 30” are at the installer and users discretion.
| Roof cap | |||||||
|
|
|
|
|
|
|
| 3¼” x 14” duct |
|
|
|
|
|
|
|
| OR 3¼” x 10” |
|
|
|
| |||||
|
|
|
|
|
|
|
| 3¼” x 14” to |
Wall |
|
|
|
|
|
|
| 3¼” x 10” adaptor |
|
|
|
|
|
|
| model T461 (optional) | |
cap |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| Cabinet blower |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| Hood |
|
|
|
|
|
|
|
| 24” minimum above |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| cooking surface |
Wall cap
Roof cap
7” OR 8” round duct
Transition model 459 3¼” x 14” to 8” OR model T460
3¼” x 14” to 7” 
Cabinet blower
Hood
24” minimum above cooking surface
HH0045A
HH0046A
2. PREPARE THE INSTALLATION
Make sure that the following items are included:
-Hood
-Accessories:
•Filters (2 for 30’’ and 36’’ width hoods, 3 for 42’’ width hood)
•Cabinet blower including left and right flow deviators (assembled to cabinet blower)
•Electrical cable with
•3¼” x 14” adapter/damper (inside one filler)
•Bag of parts (inside one filler) including:
(2)wire clamps, (5) no. 8 x 1/2” screws, (3) wire connectors, (9) no. 8 x 3/8” screws
Parts sold separately:
-Halogen lights (MR16, GU10, 120 V, 50 W)
-Transition 3¼” x 14” to 8” round model no. 459 (optional), transition 3¼” x 14” to 7” round model no. T460 (optional), adaptor/damper 3¼” x 14” to 3¼” x 10” model T461 (optional), ducts, elbows, dampers, wall and roof caps. Refer to page 1 for a complete list of venting options and model numbers.
NOTES: 1. During installation, protect countertop and/or cooktop.
2.If the bottom of the cabinet is recessed, attach three 1’’ width wood strip (not included). Refer to figure below for wood strips proper location.
CABINET BOTTOM
1” |
|
|
1” | 10¼’’ | 1” |
1¾’’ |
| 1¾’’ |
HO0045A |
|
|
- 2 -
