Broan warranty Operation, Cleaning, ALLURE QSE1 SERIES, Lamp Replacement, Range Hood, Page

	ALLURE® QSE1 SERIES
	RANGE HOOD
	Page 5
OPERATION	LAMP REPLACEMENT

LIGHT

LENS

Fan: The 3-position rocker switch (on the left) controls the fan. The left position is low speed, center position is off, and right position is high speed. An indicator light shows that the fan is on.

Light: The 3-position rocker switch (on the right) controls the lights. The left position is low light intensity, center position is off, and right position is high light intensity.

CLEANING

1Pull Tab on Light Lens forward and pull down to remove lens.

WARNING:To reduce the risk of electric shock, disconnect from power supply before cleaning.

Aluminum mesh filters: Clean frequently using hot water and a mild detergent. Filters are dishwasher safe.

To clean hood: Remove filters. Use a damp cloth and a mild detergent to wipe all grease-laden surfaces. Use care when cleaning fan blade - it must not become bent or misaligned. DO NOT ALLOW WATER TO ENTER MOTOR. Make sure all surfaces are completely dry before re-installing filters and restoring power.

Motor is permanently lubricated. Do not oil or disassemble motor.

4W

NIGHT LIGHT

C-7 BULB

42W

FLUORESCENT LAMP GX24Q-4

!CAUTION: Bulbs may be hot! Refer to bulb packag- ing for further information.

2	Grasp Lamp at base, tilt down and pull out to remove.
	Replace with 42W Fluorescent Lamp GX24Q-4. Night Light
	uses 4W, C-7 bulb.
3	Replace light lens.