MODEL QTRE080R
Page 5
MOUNTING
FRAME
DUCT CONNECTOR SCREW
BRACKET (provided)
EXISTING
ELECTRICAL
WIRING
WIRING PLATE (shown
removed
from fan housing)
INSTALL HOUSING
HOUSING |
5.Attach the duct connector bracket to the mounting frame using the (1) screw provided. Position the bottom edge of the duct connector bracket so it touches the finished surface of the ceiling and tighten the screw.
CONNECT ELECTRICAL WIRING
SCREW (5) |
(provided) |
7.Position the two movable brackets of the mounting frame directly across from each other and insert the housing into the mounting frame until it touches the duct connector bracket. Secure the housing to the mounting frame and duct connector bracket using the (5) screws provided.
6.Retrieve the existing electrical wiring from above the ceiling and use a UL approved connector to secure it to the wiring plate.
INSTALL THUMBSCREW & GRILLE
THUMBSCREW |
8.Install thumbscrew through flange of motor plate as shown.
9.Squeeze grille springs and insert them into slots on each side of housing. Push grille against ceiling.