Broan RM503004 manual Non-Ducted Recirculation Filters Installation, Maintenance, Grease Filter

Models: RM503004

1 36
Download 36 pages 6.74 Kb
Page 9
Image 9
NON-DUCTED RECIRCULATION FILTERS INSTALLATION

NON-DUCTED RECIRCULATION FILTERS INSTALLATION

1.Non-ducted recirculation filters (B03300487) is included.

2.Position the filters over the blower.

3.Rotate to lock filters in place.

MAINTENANCE

Proper maintenance of the Range Hood will assure proper performance of the unit.

Grease Filter

The grease filter should be cleaned frequently. Use a warm detergent solution. Grease filter is dishwasher safe.

Remove filter by pushing filter towards the back of hood and rotating filter downward.

NON-DUCTED

RECIRCULATION

FILTERS

fig.12

GREASE FILTER

fig.13

Non-ducted recirculation filters

The non-ducted recirculation filters should be changed every 6 months. Rotate the filters to remove and replace.

Hood Cleaning

Stainless steel is one of the easiest materials to keep clean. Occasional care will help preserve its fine appearance.

Cleaning tips:

Hot water with soap or detergent is all that is usually needed.

Follow all cleaning by rinsing with clear water. Wipe dry with a clean, soft cloth to avoid water marks.

For discolorations or deposits that persist, use a non-scratching household cleanser or stainless steel polishing powder with a little water and a soft cloth.

For stubborn cases, use a plastic scouring pad or soft bristle brush together with cleanser and water. Rub lightly in direction of polishing lines or "grain" of the stainless finish. Avoid using too much pressure which may mar the surface.

DO NOT allow deposits to remain for long periods of time.

DO NOT use ordinary steel wool or steel brushes. Small bits of steel may adhere to the surface causing rust.

DO NOT allow salt solutions, disinfectants, bleaches, or cleaning compounds to remain in

contact with stainless steel for extended periods. Many of these compounds contain chemi- cals which may be harmful. Rinse with water after exposure and wipe dry with a clean cloth.

Painted surfaces should be cleaned with warm water and mild detergent only.

9

Page 9
Image 9
Broan RM503004 Non-Ducted Recirculation Filters Installation, Maintenance, Grease Filter, Non-ducted recirculation filters