OPERATION
Controls
The hood is operated using the slide controls under the bottom of the hood.
The light switch turns the lamps on and off.
The blower switch :makes it possible to select the motor operating speed. Position 0: motor off.
The pilot lamp lights up whenever the blower is on.
LIGHT
SWITCHBLOWER SWITCH
PILOT
LAMP
HALOGEN BULBS
This range hood requires two halogen bulbs (Type T4, 12V, 20W).
ALWAYS SWITCH OFF THE ELECTRICITY SUPPLY BEFORE CARRYING OUT ANY OPERATIONS ON THE APPLIANCE.
To change bulbs:
1.Loosen the ring nut by turning it counterclockwise.
2.Remove the bulb by pulling sideward(DO
NOT ROTATE). CAUTION: BULB MAY BE
HOT!
3.Replace with Type T4, 12V, 20W halogen bulb. Do not touch replacement bulb with bare hands!
RING NUT
FUSE REPLACEMENT
SWITCH OFFTHE ELECTRICITY SUPPLY.
Remove the decorative flue.
Open the fuse box.
Replace with the same type of fuse (5x20mm, 4A, 125V).
DECORATIVE FLUE
FUSE
BOX
FUSE
- 10 -
