12. INSTALL FILTERS

CAUTION

Remove protective plastic film covering filters before installing them.

It is recommended to install side filters first and finish with center one(s).

1.Insert upper end of filter into the hood (finger sized cup side).

2.Raise lower end toward the inside of hood.

3.Position rear part of filter into channel and pull.

4.Using finger sized cup, pull on the upper end of filter and slide it under the front inner retaining piece.

1

2

4

3

HD0024

HD0065

Replacement filters are available from your dealer. See label inside hood for size and part number.

Baffle Filters

Baffle filters are available as an option. To order them, refer to the table below to find the right filter kit number for your hood. To install them, refer to instruction sheet included with baffle filter kit.

KIT #

HOOD WIDTH

RBF6030

30”

RBF6036

36”

RBF6042

42”

RBF6048

48”

RBF6054

54”

RBF6060

60”

RBF6066

66”

RBF6072

72”

HD0011

BAFFLE FILTER (TYPICAL)

- 10 -