Brocade Network Advisor Installation and Migration Guide 21
53-1003373-01
Configuring Network Advisor 2
b. Select an address from the Switch - Server IP Configuration Preferred Address list.
•Select Any from the Switch - Server IP Configuration Preferred Address list to enable
switch and server communication with one of the reachable IP address present in the
server. By default, Any option is selected.
or
•Select an IP address from the Switch - Server IP Configuration Preferred Address list.
The preferred IP address is used for switch and server communication. If the selected
IP address changes, you will be unable to connect to the server. To change the IP
address after configuration, refer to “Configuring an explicit server IP address” on
page 38.
c. Click Next.
9. Complete the following steps on the Server Configuration screen (Figure 1).
FIGURE 1 Server Configuration screen
a. Enter a port number in the Web Server Port # (HTTPS) field (default is 443).
b. Enable HTTP redirection to HTTPS by selecting the Redirect HTTP Requests to HTTPS
check box.
When you enable HTTP redirection, the server uses port 80 to redirect HTTP requests to
HTTPS. You can configure the server port settings from the Options dialog box (Server Port
pane). For instructions, refer to the Network Advisor User Manual or online help.
c. Enter a port number in the Database Port # field (default is 5432).
NOTE
Do not use a port number below 1024.
d. Enter a port number in the Starting Port Number field (default is 24600).
NOTE
For Professional software, the server requires 11 consecutive free ports beginning with
the starting port number.
NOTE
For Trial and Licensed software, the server requires 11 consecutive free ports beginning
with the starting port number.