Broilmaster PC2CART-1, DC2CART-1 owner manual Fixed Base Installation, Instructions

FIXED BASE INSTALLATION 6

Install one 1/4-20 x 3/4 phillips head screw into the fac- tory installed nut on the Left Side of cart. Figure 11.

INSTRUCTIONS 9

Install one 1/4-20 x 1/2 hex head BOS into drip pan drawer assembly (2) and tighten knob (1). Figure 13.

7

Fasten the Cylinder Retainer (3) to the screw with a wing nut. Adjust height to accommodate your LP cyl- inder. Figure 11.

FIGURE 11

8

Using four 1/4-20 x 3/4 screws, fasten the grill to the cart. Figure 12.

Note: To ease assembly you may wish to install the igniter as shown in your Broilmaster® grill manual before attaching the grill to the cart.

FIGURE 12

FIGURE 13

10

Slide the mounting tabs on the control housing (7) be- hind the opening on cart. Allow the control housing to rest at bottom of opening on cart. Figure 14.

11

Align the holes in the front of the cart with the nuts on the control housing (with the mounting tabs positioned inside the cart) and attach with two 10-24x3/8 phillips head screws. Figure 14.

FIGURE 14

B100999-1-0906 Page 11